[Dsg-rich] Replacement PT for RICH air-cooling buffer tank

[Tyler Lemon]

Hi Bob,

We have submitted a PR for two new PTs (one replacement, one spare) for the RICH air-cooling system's buffer tank.

Once it comes in, we will put the appropriate connector one them and give them to Hall B Engineering for installation/storage.

The new PTs are not the same model or brand as the old one, so the changes would need to be looked over by a DA (Bill Crahen was the last DA that worked on RICH's gas system).

The new PTs are Dwyer Instruments model 628-11-GH-P8-E4-S5. It's range is 0 - 150 psig and the fitting is a 1/8" male NPT. Attached is the manual that has its complete specs and pressure ratings.

If you need any more information on the new PTs for the DA or anything else, let us know.

Best regards,
Tyler

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20190424/ef96c44d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Dwyer 628 model PT manual.pdf
Type: application/pdf
Size: 859255 bytes
Desc: Dwyer 628 model PT manual.pdf
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20190424/ef96c44d/attachment-0001.pdf>