[Dsg-rich] [EXTERNAL] Re: RICH dry box monitoring on EPICS

[Patrizia Rossi]

Ah…true. You are right, hardware was needed for remote control not for monitoring
thanks Marco
--------------------------------------------------
# Patrizia Rossi
# Jefferson Lab 
# 12000 Jefferson Avenue
# Suite 5
# Newport News VA 23606 (USA)
# e-mail: rossi at jlab.org
# phone: +1 (757) 269 7740
# fax: + 1 (757) 269 5800
# cell: +1 (757) 528 7606




> On 26 Mar 2020, at 15:18, Marco Contalbrigo <mcontalb at fe.infn.it> wrote:
> 
> Hi Patrizia,
> if I am not mistaken, the harware was required for implementing
> a remote control. There was no need for the sole monitoring
> purpose. DSG can confirm.
> Bests, Marco.
> 
> On Thu, 26 Mar 2020, Tyler Lemon wrote:
> 
>> Hello Dr. Rossi,
>> There was not anything that had to be done with hardware to implement EPICS.
>> It could all be done remotely.
>> Best regards,
>> Tyler
>> _______________________________________________________________________________________________________________________________________________________________
>> From: Patrizia Rossi <rossi at jlab.org>
>> Sent: Thursday, March 26, 2020 10:12 AM
>> To: Tyler Lemon <tlemon at jlab.org>
>> Cc: dsg-rich <dsg-rich at jlab.org>
>> Subject: Re: [Dsg-rich] RICH dry box monitoring on EPICS  
>> Hi Tyler,
>> thank you very much. I was surprised by your e-mail because I understood that some hardware work should have been done to implement EPICS. Am I wrong or it has
>> been done?
>> patrizia
>> --------------------------------------------------
>> # Patrizia Rossi
>> # Jefferson Lab
>> # 12000 Jefferson Avenue
>> # Suite 5
>> # Newport News VA 23606 (USA)
>> # e-mail: rossi at jlab.org
>> # phone: +1 (757) 269 7740
>> # fax: + 1 (757) 269 5800
>> # cell: +1 (757) 528 7606
>> > On 26 Mar 2020, at 14:47, Tyler Lemon <tlemon at jlab.org> wrote:
>> >
>> > Hello,
>> >
>> > I've added EPICS monitoring for the aerogel dry boxes.
>> >
>> > There are two ways to get to the screens: through clascss or WEDM.
>> >
>> > I've submitted a pull request to Nathan Baltzell for the clascss screen to be added to the main clascss main menu. I expect he'll be able get the screen
>> pushed live within the next day or so. To get to the screen, there's a new option added to the Hardware Interlocks menu on the RICH Overview screen.
>> >
>> > There's also a WEDM version of the screen put onto epicsweb. This version is accessible through any web browser at the link below. All that is needed is a
>> JLab CUE log in.
>> >
>> > https://epicsweb.jlab.org/wedm/screen?edl=%2fcs%2fopshome%2fedm%2fdsg%2fRICH-drybox.edl
>> >
>> > Some notes about the humidity reading:
>> >        • The humidity sensors have +/- 3.5% RH accuracy. They are the same sensors that are in RICH.
>> >        • Drybox 2 is the one collaborators from INFN brought from Italy. This drybox is not well sealed (it had this problem in while RICH was being
>> assembled) so that is why it's humidity may be a little higher at times.
>> > -Tyler
>> > _______________________________________________
>> > Dsg-rich mailing list
>> > Dsg-rich at jlab.org
>> > https://mailman.jlab.org/mailman/listinfo/dsg-rich