[Dsg-rich] [EXTERNAL] Re: RICH dry box monitoring on EPICS

[Patrizia Rossi]

thanks Brain for confirming 
--------------------------------------------------
# Patrizia Rossi
# Jefferson Lab 
# 12000 Jefferson Avenue
# Suite 5
# Newport News VA 23606 (USA)
# e-mail: rossi at jlab.org
# phone: +1 (757) 269 7740
# fax: + 1 (757) 269 5800
# cell: +1 (757) 528 7606




> On 26 Mar 2020, at 15:21, Brian Eng <beng at jlab.org> wrote:
> 
> Correct additional hardware work was only to have control, this provides only monitoring.
> 
> Again, my fault for muddying the waters by bringing that up.
> 
> ________________________________________
> From: Dsg-rich <dsg-rich-bounces at jlab.org> on behalf of Marco Contalbrigo <mcontalb at fe.infn.it>
> Sent: Thursday, March 26, 2020 10:18 AM
> To: Tyler Lemon
> Cc: dsg-rich
> Subject: [Dsg-rich] [EXTERNAL] Re:  RICH dry box monitoring on EPICS
> 
> Hi Patrizia,
> if I am not mistaken, the harware was required for implementing
> a remote control. There was no need for the sole monitoring
> purpose. DSG can confirm.
> Bests, Marco.
> 
> On Thu, 26 Mar 2020, Tyler Lemon wrote:
> 
>> Hello Dr. Rossi,
>> 
>> There was not anything that had to be done with hardware to implement EPICS.
>> 
>> It could all be done remotely.
>> 
>> Best regards,
>> Tyler
>> 
>> _______________________________________________________________________________________________________________________________________________________________
>> From: Patrizia Rossi <rossi at jlab.org>
>> Sent: Thursday, March 26, 2020 10:12 AM
>> To: Tyler Lemon <tlemon at jlab.org>
>> Cc: dsg-rich <dsg-rich at jlab.org>
>> Subject: Re: [Dsg-rich] RICH dry box monitoring on EPICS
>> Hi Tyler,
>> 
>> thank you very much. I was surprised by your e-mail because I understood that some hardware work should have been done to implement EPICS. Am I wrong or it has
>> been done?
>> 
>> patrizia
>> --------------------------------------------------
>> # Patrizia Rossi
>> # Jefferson Lab
>> # 12000 Jefferson Avenue
>> # Suite 5
>> # Newport News VA 23606 (USA)
>> # e-mail: rossi at jlab.org
>> # phone: +1 (757) 269 7740
>> # fax: + 1 (757) 269 5800
>> # cell: +1 (757) 528 7606
>> 
>> 
>> 
>> 
>>> On 26 Mar 2020, at 14:47, Tyler Lemon <tlemon at jlab.org> wrote:
>>> 
>>> Hello,
>>> 
>>> I've added EPICS monitoring for the aerogel dry boxes.
>>> 
>>> There are two ways to get to the screens: through clascss or WEDM.
>>> 
>>> I've submitted a pull request to Nathan Baltzell for the clascss screen to be added to the main clascss main menu. I expect he'll be able get the screen
>> pushed live within the next day or so. To get to the screen, there's a new option added to the Hardware Interlocks menu on the RICH Overview screen.
>>> 
>>> There's also a WEDM version of the screen put onto epicsweb. This version is accessible through any web browser at the link below. All that is needed is a
>> JLab CUE log in.
>>> 
>>> https://epicsweb.jlab.org/wedm/screen?edl=%2fcs%2fopshome%2fedm%2fdsg%2fRICH-drybox.edl
>>> 
>>> Some notes about the humidity reading:
>>>         • The humidity sensors have +/- 3.5% RH accuracy. They are the same sensors that are in RICH.
>>>         • Drybox 2 is the one collaborators from INFN brought from Italy. This drybox is not well sealed (it had this problem in while RICH was being
>> assembled) so that is why it's humidity may be a little higher at times.
>>> -Tyler
>>> _______________________________________________
>>> Dsg-rich mailing list
>>> Dsg-rich at jlab.org
>>> https://mailman.jlab.org/mailman/listinfo/dsg-rich
>> 
>> 
>> 
> 
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich