[dsg-hallb_rich] RICH II patch panels quote

[Marc Mcmullen]

Hi Marco,

Here is the are the two quotes I was able to get for the panels. The table below also contains the estimates for time, the tolerance, and manufacturing information. This should help with the decision on which shop to go with.

The Jlab shop will need to be paid for with an account code.



Shop
Quote
Time estimate
Tolerance +/-
Comment
Jlab Machine Shop
$2000
2 weeks
0.005" (Milled)
Material will be sourced and then milled in-house
GandR Metals
$3020
5 to 7 weeks
0.125" for edge and large openings.

0.032" for holes and pattern
Machined with plasma cutter

Regards,
Marc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20211117/51f6270c/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: GandR metals quote.pdf
Type: application/pdf
Size: 124817 bytes
Desc: GandR metals quote.pdf
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20211117/51f6270c/attachment-0002.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Jlab machine shop quote.pdf
Type: application/pdf
Size: 324711 bytes
Desc: Jlab machine shop quote.pdf
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20211117/51f6270c/attachment-0003.pdf>