[dsg-hallb_rich] Sensor type and quantity for RICH-II gas system?

[Tyler Lemon]

Hi Bob,

Thanks for your reply.

We'll make sure all of those instruments can be connected to our chassis.

Tyler
________________________________
From: Bob Miller <rmiller at jlab.org>
Sent: Monday, September 27, 2021 5:46 PM
To: Tyler Lemon <tlemon at jlab.org>
Cc: Patrizia Rossi <rossi at jlab.org>; Amrit Yegneswaran <yeg at jlab.org>; dsg-hallb_rich at jlab.org <dsg-hallb_rich at jlab.org>
Subject: Re: Sensor type and quantity for RICH-II gas system?


Hi Tyler,


Yes, the only addition sensors are 2 more AALBORG gfms-010500 MFM flow meters.


The 2 flow meters currently in the system will be used for RICH sector 4, and the 2 new flow meters will be used for RICH sector 1.


The current SF11 compressor, tank, and manifold will be moved to the EEL building next year for the RICH-II assembly and testing.  The manifold will be modified to support RICH-II after the EEL testing.


Regards,

Bob



On 9/27/2021 4:30 PM, Tyler Lemon wrote:
Hello Bob,

You mentioned that Hall B Engineering would be working on the gas systems for RICH-II in September.

Have the quantities and types of sensors that need to be monitored been determined?

We will incorporate the hardware needed for reading them out into our hardware interlock chassis, but we need those details first.

Thanks,

Tyler

--
Bob Miller
Hall B Lead Engineer
Jefferson Lab
757 822-9586


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20210928/442c729a/attachment-0001.html>