[dsg-hallb_rich] [EXTERNAL] Re: Parts for RICH mirrors to 3D print

[Brian Eng]

Hi Marco,

The first thing will be the size of the parts, the build volume of the SLA printer isn't terribly large (145x145x175 mm) some of the PLA ones on-site are quite large but I don't have the dimensions off-hand.

The next would be the detailed required, SLA offers much finer detail compared to the PLA ones albeit at the expense of print time.

Last would be the quantity, which is sort of tied in with the earlier points. If you need a whole bunch of parts the SLA printer doesn't have very high throughput.

Another thing to keep in mind is that the SLA printer is the only one we have direct control over so we'd have to work around scheduling the prints with other groups. I suspect that won't be much of an issue, but it's at least worth mentioning.

Hope that helps some.

________________________________
From: dsg-hallb_rich <dsg-hallb_rich-bounces at jlab.org> on behalf of Marco Mirazita <Marco.Mirazita at lnf.infn.it>
Sent: Monday, January 24, 2022 4:13 PM
To: Tyler Lemon <tlemon at jlab.org>
Cc: dsg-hallb_rich at jlab.org <dsg-hallb_rich at jlab.org>
Subject: [dsg-hallb_rich] [EXTERNAL] Re: Parts for RICH mirrors to 3D print

Hi Tyler,
we will send you the model of the parts, but I'm not sure which printer
is better, we can talk tomorrow.
For tomorrow, we would also need a tap to redo the 3/4 inch thread of
the holes on the stiffening tool for the swivel eyebolts.
Thank you
Marco

Il 2022-01-24 20:12 Tyler Lemon ha scritto:
> Hi Marco,
>
>  We talked today about having some items 3D printed at JLab for the
> RICH spherical mirror support system.
>
>  If you have it, could you send us the model for what needs to be
> printed?
>
>  DSG has an SLA 3D printer that could be used or if an extrusion 3D
> printer is preferred, we can look into one of JLab's other 3D
> printers.
> _______________________________________________
> dsg-hallb_rich mailing list
> dsg-hallb_rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rich
_______________________________________________
dsg-hallb_rich mailing list
dsg-hallb_rich at jlab.org
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rich
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20220124/ed2e0201/attachment.html>