[dsg-hallb_rich] 3D printed air exhaust for RICH

[Tyler Lemon]

Hi Brian,

For the RICH-II air exhaust, we'll use 3D printed adapters (STEP file is attached). Can you use our printer to make a test print?

I'll be on site while the collaborators are here, so to save you a trip in to the lab, if you tell me what to do, I can set up the 3D printer and make the test print.

-Tyler


________________________________
From: Dario Orecchini <Dario.Orecchini at lnf.infn.it>
Sent: Monday, March 28, 2022 4:45 PM
To: Tyler Lemon <tlemon at jlab.org>
Cc: Marco Mirazita <marco.mirazita at lnf.infn.it>; Sandro Tomassini <sandro.tomassini at lnf.infn.it>
Subject: [EXTERNAL] 3D Print

Tyler,
another help request for you.

We need a 3D print of the step file attached (Exhaust Air Pipe Adapter).
For now, I'm asking you just one part, so to check the dimension and the
geometry on the RICH.

Then we'll need n. 6 3D Print parts.

Let me know if I have to modify some details.

Thanks
Dario
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20220329/279e76e5/attachment-0001.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Exaust Air Pipe Adapter.stp
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20220329/279e76e5/attachment-0001.ksh>