[dsg-hallb_rich] RICH S1 interlock controller swap

[Tyler Lemon]

Hello,

Quick update:
The hardware work in the hall is done.

There’s a little bit of software work left to make sure it’s all set up, but I will do that remotely from the counting house.

-Tyler

________________________________
From: dsg-hallb_rich <dsg-hallb_rich-bounces at jlab.org> on behalf of Tyler Lemon via dsg-hallb_rich <dsg-hallb_rich at jlab.org>
Sent: Wednesday, June 11, 2025 8:41:25 AM
To: tlemon--- via dsg-hallb_rich <dsg-hallb_rich at jlab.org>; Christopher Dilks <dilks at jlab.org>; Valery Kubarovsky <vpk at jlab.org>
Subject: Re: [dsg-hallb_rich] RICH S1 interlock controller swap

Hi,

I can see that RICH HV and LV are still on.

I will be turning both RICH Sectors off shortly since I need access to the back of the interlock chassis, reaching over the HV distribution.

-Tyler

________________________________
From: dsg-hallb_rich <dsg-hallb_rich-bounces at jlab.org> on behalf of Tyler Lemon via dsg-hallb_rich <dsg-hallb_rich at jlab.org>
Sent: Wednesday, June 11, 2025 8:28:29 AM
To: tlemon--- via dsg-hallb_rich <dsg-hallb_rich at jlab.org>; Christopher Dilks <dilks at jlab.org>; Valery Kubarovsky <vpk at jlab.org>
Subject: [dsg-hallb_rich] RICH S1 interlock controller swap

Hello,

I’ll be starting the work soon to swap the RICH S1 controller to restore the temperature and humidity sensors.

I’ll send an update at least by lunch time and post a log book entry when done.

-Tyler
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20250611/726bdf15/attachment-0001.htm>