[dsg-hallb_rtpc] Deuterium bottle Regulator

[Brian Eng]

Unless someone has the exact model that is currently installed it's not as straight forward as just finding another regulator and swapping them out.

In any event since the regulator is part of the pressure system make sure to coordinate the work with Bob.

________________________________
From: dsg-hallb_rtpc <dsg-hallb_rtpc-bounces at jlab.org> on behalf of Carlos Ayerbe Gayoso <gayoso at jlab.org>
Sent: Wednesday, August 12, 2020 5:43 PM
To: dsg-hallb_rtpc at jlab.org <dsg-hallb_rtpc at jlab.org>; Sebastian Kuhn <kuhn at jlab.org>
Cc: Morgan Cook IV <mcookiv at jlab.org>
Subject: [dsg-hallb_rtpc] Deuterium bottle Regulator

Hi all,

as mentioned by Stephan, the high pressure indicator of the deuterium bottle seems to show lower pressure that should be (I checked again and it shows ~ 1500psi)

If the plan is to change the regulator (I don't know) and the problem is to find one (also, I don't know) I wonder if one of the regulators from W&M is available and if can be used. In the meanwhile, it seems to work well.

Cheers

-Carlos
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rtpc/attachments/20200812/8e30b270/attachment.html>