[dsg-hallb_rtpc] [EXTERNAL] Re: Deuterium bottle Regulator

[mhattawy@odu.edu]

I will be providing tonight during my shift some pics and specifications
for the model we are using.

On Wed, Aug 12, 2020 at 6:05 PM Brian Eng <beng at jlab.org> wrote:

> Unless someone has the exact model that is currently installed it's not as
> straight forward as just finding another regulator and swapping them out.
>
> In any event since the regulator is part of the pressure system make sure
> to coordinate the work with Bob.
>
> ------------------------------
> *From:* dsg-hallb_rtpc <dsg-hallb_rtpc-bounces at jlab.org> on behalf of
> Carlos Ayerbe Gayoso <gayoso at jlab.org>
> *Sent:* Wednesday, August 12, 2020 5:43 PM
> *To:* dsg-hallb_rtpc at jlab.org <dsg-hallb_rtpc at jlab.org>; Sebastian Kuhn <
> kuhn at jlab.org>
> *Cc:* Morgan Cook IV <mcookiv at jlab.org>
> *Subject:* [dsg-hallb_rtpc] Deuterium bottle Regulator
>
> Hi all,
>
> as mentioned by Stephan, the high pressure indicator of the deuterium
> bottle seems to show lower pressure that should be (I checked again and it
> shows ~ 1500psi)
>
> If the plan is to change the regulator (I don't know) and the problem is
> to find one (also, I don't know) I wonder if one of the regulators from W&M
> is available and if can be used. In the meanwhile, it seems to work well.
>
> Cheers
>
> -Carlos
> _______________________________________________
> dsg-hallb_rtpc mailing list
> dsg-hallb_rtpc at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rtpc
>


-- 
Best regards,
Mohammad Hattawy.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rtpc/attachments/20200812/fc4f3cc5/attachment.html>