[dsg-svt] SVT R3 HFCB temperature

[Yuri Gotra]

If this would be the case how come the reading (thus the voltage) goes 
good again each time the patch panel contacts are touched, then goes bad 
again within hours or days.


On 2/19/18 10:45 AM, Peter Bonneau wrote:
> I've noticed that the SVT R3 11B temperature is reading high again.
> It could be that the connection that is causing this higher 
> temperature is inaccessible or on HFCB itself.
> The voltage from the temperature sensor is 1.65V. It should be ~ 2.02V.
>
> Peter
>
>
> _______________________________________________
> dsg-svt mailing list
> dsg-svt at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-svt

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20180219/8d95d883/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gotra.vcf
Type: text/x-vcard
Size: 102 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20180219/8d95d883/attachment-0002.vcf>