[dsg-svt] ambient sensor boards

[Yuri Gotra]

Brian,

Stephan inserted the sensor boards to MVT yesterday, could you please 
connect the cables and check the readings. We would need the values to 
be added to the CSS too. Thank you


On 5/15/18 3:54 PM, Brian Eng wrote:
> Yuri,
>
> The assemblies are complete and tested.
>
> They're labeled A,B,C at both ends if you want to keep track of where they get installed.
>
> I put them on top of the MVT wooden crate in EEL/125.
>
> !!! IMPORTANT !!!
> Note that there is still tape on top of the humidity sensors that needs to be removed prior to installation. It ships with that installed to protect the sensors from being saturated, so best to remove it once they're down in the Hall.
>
> They will be tested after installation and re-terminated with connectors once the patch panel work starts.
>
> --
> Brian Eng
> Detector Support Group
> 757-269-6018
>
>> On May 14, 2018, at 12:06 PM, Yuri Gotra <gotra at jlab.org> wrote:
>>
>> MVT is going to be opened today. Please provide the ambient temperature sensor boards, cables ~5 meters long to mount inside the BMT tomorrow. Thank you
>>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: gotra.vcf
Type: text/x-vcard
Size: 102 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20180516/f100793b/attachment-0002.vcf>