[dsg-svt] [New Logentry] SVT MPOD FW Updated, R3S11B Working Again

[beng at jlab.org]

Logentry Text:
--
Managed to remove the broken key from the cRIO interlock chassis and used Velcro to attach the key to the box instead of leaving them plugged in (see attached image); the same key works in both of the switches. There is also a spare key located inside the chassis itself.

Updated to the latest stable firmware (which matches what Hall D is using) on all the MPOD controllers: MPOD-BL-2.2439.0 &  MPODmaster-2.1.4298.0

Somehow got the hybrid temperature working again, but all we did is un/re-plug several times and measure with a DMM. So nothing obvious was wrong with it.

---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3739743
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-svt/attachments/20191106/94b4c1e6/attachment.html>