[dsg-svt] [New Logentry] SVT MPOD FW Updated, R3S11B Working Again

[Yuri Gotra]

R3S11B temperature sensor readout failed again yesterday, the reading 
was unstable. We have a bad history with this sensor in 2017, 2018, and 
now. I suspect intermittent connection on the patch panel. I disabled it 
for now from the interlock to prevent the trips.

On 11/6/19 10:00 AM, beng at jlab.org wrote:
> Logentry Text:
> --
> Managed to remove the broken key from the cRIO interlock chassis and used Velcro to attach the key to the box instead of leaving them plugged in (see attached image); the same key works in both of the switches. There is also a spare key located inside the chassis itself.
>
> Updated to the latest stable firmware (which matches what Hall D is using) on all the MPOD controllers: MPOD-BL-2.2439.0 &  MPODmaster-2.1.4298.0
>
> Somehow got the hybrid temperature working again, but all we did is un/re-plug several times and measure with a DMM. So nothing obvious was wrong with it.
>
> ---
>
> This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3739743
>
> _______________________________________________
> dsg-svt mailing list
> dsg-svt at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-svt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20191109/f4c9a2ed/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gotra.vcf
Type: text/x-vcard
Size: 102 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20191109/f4c9a2ed/attachment-0002.vcf>