[dsg-hallb_svt] Debugging SVT DAQ

[Yuri Gotra]

Thank you for your help, Brian

A question about icing. Did you warm up the SVT for a few hours before 
opening the plastic bag? This was in the instructions I sent last week. 
The detector should be warmed up before any work on L1C. With nitrogen 
purging and the detector at RT there should be no condensation. After 
the work is done, the chiller should be set to the same temperature as 
before (currently -10 C).

On 4/27/21 1:51 AM, Brian Eng wrote:
> Hi Yuri,
>
> Here's what I've noticed so far with R1 M2.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20210427/e9f446ef/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gotra.vcf
Type: text/x-vcard
Size: 102 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20210427/e9f446ef/attachment.vcf>