[Dsg-hallc_controls] 1T+ Magnet

[Brian Eng]

Okay, it might still be to low to actually get a lock, but it's worth trying at least.

Let me know where/when to bring it.

Thanks

----- Original Message -----
> From: "Joseph Meyers" <meyers at jlab.org>
> To: "Brian Eng" <beng at jlab.org>
> Sent: Thursday, August 2, 2018 2:56:36 PM
> Subject: Re: 1T+ Magnet

> We have put together a dipole to reach +1.1T. We are powering it up and testing
> it tomorrow. I let you know how it turns out if you're still interested in
> testing your probe.
> 
> Joe M.
> 
> From: "Brian Eng" <beng at jlab.org>
> To: "Joseph Meyers" <meyers at jlab.org>
> Sent: Tuesday, July 24, 2018 3:33:54 PM
> Subject: Re: 1T+ Magnet
> 
> Okay, thanks.
> 
> I think the minimum the probe can read might actually be slightly lower (~1.08
> T), but still above 1T.
> 
> ----- Original Message -----
>> From: "Joseph Meyers" <meyers at jlab.org>
>> To: "Brian Eng" <beng at jlab.org>
>> Sent: Tuesday, July 24, 2018 3:26:23 PM
>> Subject: Re: 1T+ Magnet
> 
>> Brian,
>> 
>> We have a dipole that can produce right at 1T setup on the shop floor now. Let
>> me check with Mike Beck to see if we have anything on the other side of the
>> shop that we could ramp up safely to get past 1.13T. I'll let you know tomorrow
>> morning.
>> 
>> Joe M.
>> 
>> 
>> From: "Brian Eng" <beng at jlab.org>
>> To: "Joseph Meyers" <meyers at jlab.org>
>> Sent: Tuesday, July 24, 2018 2:32:52 PM
>> Subject: 1T+ Magnet
>> 
>> Hi Joseph,
>> 
>> Do you have a 1T+ magnet that we could test a Metrolab PT2026 with a 1226 probe
>> that has a range of 1.13 – 3.52 T?
>> 
>> Thanks
>> 
>>> On Jul 23, 2018, at 1:27 PM, Steve Lassiter <lassiter at jlab.org> wrote:
>>> 
>>> Contact Joseph Meyers
>>> steven
>>> 
>>> From: "Brian Eng" <beng at jlab.org>
>>> To: "Steve Lassiter" <lassiter at jlab.org>
>>> Cc: "dsg-hallc controls" <dsg-hallc_controls at jlab.org>
>>> Sent: Monday, July 23, 2018 12:48:17 PM
>>> Subject: Re: [Dsg-hallc_controls] Hall C PLC task status report
>>> 
>>> Hi Steve,
>>> 
>>> Do you have a contact person for this group?
>>> 
>>> I also couldn't find that building # either; I think it used to be the old IH
>>> trailer?
>>> 
>>> > On Jul 13, 2018, at 3:45 PM, Steve Lassiter <lassiter at jlab.org> wrote:
>>> > 
>>> > Hi,
>>> > 
>>> > No need to order a new permanent magnet, just ask the magnet measurement group
>>> > if the probe can be installed within their test setup in building 35. This will
>>> > give one a larger range fields to work with also.
>>> > 
> > > > Steven