[Dsg-hallc_controls] 1T+ Magnet

[Joseph Meyers]

We got it past 1.2T so it should lock. We're in the shop next week Wednesday and Thursday mornings so let me know what day works for you. 

Joe M. 


From: "Brian Eng" <beng at jlab.org> 
To: "Joseph Meyers" <meyers at jlab.org> 
Cc: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
Sent: Friday, August 3, 2018 3:29:09 PM 
Subject: Re: 1T+ Magnet 

Okay, it might still be to low to actually get a lock, but it's worth trying at least. 

Let me know where/when to bring it. 

Thanks 

----- Original Message ----- 
> From: "Joseph Meyers" <meyers at jlab.org> 
> To: "Brian Eng" <beng at jlab.org> 
> Sent: Thursday, August 2, 2018 2:56:36 PM 
> Subject: Re: 1T+ Magnet 

> We have put together a dipole to reach +1.1T. We are powering it up and testing 
> it tomorrow. I let you know how it turns out if you're still interested in 
> testing your probe. 
> 
> Joe M. 
> 
> From: "Brian Eng" <beng at jlab.org> 
> To: "Joseph Meyers" <meyers at jlab.org> 
> Sent: Tuesday, July 24, 2018 3:33:54 PM 
> Subject: Re: 1T+ Magnet 
> 
> Okay, thanks. 
> 
> I think the minimum the probe can read might actually be slightly lower (~1.08 
> T), but still above 1T. 
> 
> ----- Original Message ----- 
>> From: "Joseph Meyers" <meyers at jlab.org> 
>> To: "Brian Eng" <beng at jlab.org> 
>> Sent: Tuesday, July 24, 2018 3:26:23 PM 
>> Subject: Re: 1T+ Magnet 
> 
>> Brian, 
>> 
>> We have a dipole that can produce right at 1T setup on the shop floor now. Let 
>> me check with Mike Beck to see if we have anything on the other side of the 
>> shop that we could ramp up safely to get past 1.13T. I'll let you know tomorrow 
>> morning. 
>> 
>> Joe M. 
>> 
>> 
>> From: "Brian Eng" <beng at jlab.org> 
>> To: "Joseph Meyers" <meyers at jlab.org> 
>> Sent: Tuesday, July 24, 2018 2:32:52 PM 
>> Subject: 1T+ Magnet 
>> 
>> Hi Joseph, 
>> 
>> Do you have a 1T+ magnet that we could test a Metrolab PT2026 with a 1226 probe 
>> that has a range of 1.13 – 3.52 T? 
>> 
>> Thanks 
>> 
>>> On Jul 23, 2018, at 1:27 PM, Steve Lassiter <lassiter at jlab.org> wrote: 
>>> 
>>> Contact Joseph Meyers 
>>> steven 
>>> 
>>> From: "Brian Eng" <beng at jlab.org> 
>>> To: "Steve Lassiter" <lassiter at jlab.org> 
>>> Cc: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
>>> Sent: Monday, July 23, 2018 12:48:17 PM 
>>> Subject: Re: [Dsg-hallc_controls] Hall C PLC task status report 
>>> 
>>> Hi Steve, 
>>> 
>>> Do you have a contact person for this group? 
>>> 
>>> I also couldn't find that building # either; I think it used to be the old IH 
>>> trailer? 
>>> 
>>> > On Jul 13, 2018, at 3:45 PM, Steve Lassiter <lassiter at jlab.org> wrote: 
>>> > 
>>> > Hi, 
>>> > 
>>> > No need to order a new permanent magnet, just ask the magnet measurement group 
>>> > if the probe can be installed within their test setup in building 35. This will 
>>> > give one a larger range fields to work with also. 
>>> > 
> > > > Steven 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_controls/attachments/20180803/494422ef/attachment-0001.html>