[Dsg-hallc_controls] UPS status

[Brian Eng]

If you want to create them and let me know what they are I can write to them once I start getting useful values.



I found an ACC screen that has the dipole current which says it's at -2333.5 A

However, the NMR isn't getting a lock even with the vendor supplied software.

So either it can't get a lock at this higher field (or at the reversed polarity from the first test) or that screen is wrong?

----- Original Message -----
> From: "Steve Lassiter" <lassiter at jlab.org>
> To: "Brian Eng" <beng at jlab.org>
> Sent: Wednesday, August 15, 2018 2:54:08 PM
> Subject: Re: [Dsg-hallc_controls] UPS status

> A tag for probe reading (real) and a tag for locked or not locked (Boolean) for
> now I guess Steven ----- Original Message ----- From: Brian Eng To: Steve
> Lassiter Cc: Tyler Lemon , dsg-hallc controls Sent: Wed, 15 Aug 2018 14:43:24
> -0400 (EDT) Subject: Re: [Dsg-hallc_controls] UPS status How would you like the
> probe data? We can use the vendor supplied software or use the included LabVIEW
> drivers. If you have a PLC tag I can write to we could also write the field to
> that as well. I also tested the remote reset, it works fine. ----- Original
> Message ----- > From: "Steve Lassiter" > To: "Tyler Lemon" > Cc: "dsg-hallc
> controls" > Sent: Wednesday, August 15, 2018 2:33:17 PM > Subject: Re:
> [Dsg-hallc_controls] UPS status > The hms dipole is being ramped up now Would
> like to see the new probe data > Steven