[Dsg-hallc_controls] Hall C HMI screens

[Brian Eng]

Thanks Jack,

This link has what I was looking for:

https://epicsweb.jlab.org/wedm/screen?edl=/cs/opshome/edm/wall/Halls/HallC/HallC_O_status.edl

Basically the current in all the magnets to see if they're on or off.
Definitely not as much information as the HMI screens, but good enough to see what's going on overall I guess.

----- Original Message -----
> From: "Jack Segal" <segal at jlab.org>
> To: "Brian Eng" <beng at jlab.org>, "Steve Lassiter" <lassiter at jlab.org>
> Cc: "dsg-hallc controls" <dsg-hallc_controls at jlab.org>, "Andrew Kenyon" <kenyon at jlab.org>, "Ethan Becker"
> <ethanb at jlab.org>, "Holly Szumila" <hszumila at jlab.org>, "Stephen Wood" <saw at jlab.org>, "Cynthia Keppel"
> <keppel at jlab.org>
> Sent: Tuesday, August 28, 2018 6:06:35 PM
> Subject: Re: [Dsg-hallc_controls] Hall C HMI screens

> Ideally we would have been able to spend time on controls GUIs before we started
> running.
> I did a little poking around at one point. Queries on the EPICS Archiver gave me
> the attached
> results. I did not have time to do anything further with the information.
>   I think that for general use in the halls we would like to develop some GUIs and
>   have the
> displays pushed out in the
> 
> https://epicsweb.jlab.org/wmenu/
> 
> webserver (login is your CUE account). Similar to what has been done for Hall A
> and others.
> For example:
> 
> https://epicsweb.jlab.org/wedm/screen?edl=/cs/opshome/edm/HALLA/tools/tmpwrkDisplay.edl
> https://epicsweb.jlab.org/wedm/screen?edl=/cs/opshome/edm/cryo/CRYO_O_totalmenu.edl
> https://epicsweb.jlab.org/wedm/screen?edl=hacryo/right72/HACRYO_O_right_D1test1.edl
> 
> In the end this will be easier for the users and techs than dealing with the PLC
> oddities
> when just looking for status and information. It is also readily accessible from
> offsite.
> 
> 
> On 8/28/2018 4:10 PM, Brian Eng wrote:
>> Hi Steve,
>> 
>> Is there a general Hall C account that should be used to pull up the EPICS
>> screens? If so, which machine should be used?
>> 
>> Or is there a list of PVs somewhere?
>> 
>>> On Aug 28, 2018, at 4:05 PM, Steve Lassiter <lassiter at jlab.org> wrote:
>>>
>>> Hello All,
>>>
>>>   Just a reminder not to open an HMI screen (Magnet GUI)  while the experiments
>>>   are ongoing, without first contacting the counting house.
>>> DO NOT remote login to cmagnets as this is for the experimenters only now.
>>> DO NOT use skylla7 as the is reserved for Mike.
>>>
>>> Thanks
>>> Steven
> 
> --
> John(Jack) Segal
> Halls A and C Spectrometer Support Manager
> Thomas Jefferson National Accelerator Facility
> 12000 Jefferson Avenue
> Suite 12
> Newport News, VA 23606-4486
> Phone: (757) 269-7242
> Cell: (757) 320-9977