[Dsg-hallc_controls] connector-to-terminal-block adapter needed for APC UPS relay card

[Steve Lassiter]

Hi 
Go ahead and order what you need, I do not have a 37 pin 

Steven 

----- Original Message -----

From: "Tyler Lemon" <tlemon at jlab.org> 
To: "Steve Lassiter" <lassiter at jlab.org> 
Cc: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
Sent: Thursday, July 5, 2018 9:25:33 AM 
Subject: Re: [Dsg-hallc_controls] connector-to-terminal-block adapter needed for APC UPS relay card 



We plan on using an existing digital input module. 


What we need is an adapter to go from the 37-pin connector Mindy wired to the UPS relay card to a terminal block that can be used to make the necessary connections to the PLC. (Note: I made a typo in my previous email. We need one for a 37-pin connector, not 25-pin) 



For reference, attached is a picture of what is needed. 



-Tyler 


----- Original Message -----

From: "Steve Lassiter" <lassiter at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Cc: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
Sent: Thursday, July 5, 2018 9:17:06 AM 
Subject: Re: [Dsg-hallc_controls] connector-to-terminal-block adapter needed for APC UPS relay card 




Yes we have a few A/B terminal blocks available. But dont you need to use a terminal block that is already connected to a module? Are you proposing to add a new module? 

Steven 

----- Original Message -----

From: "Tyler Lemon" <tlemon at jlab.org> 
To: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
Sent: Thursday, July 5, 2018 9:09:07 AM 
Subject: [Dsg-hallc_controls] connector-to-terminal-block adapter needed for APC UPS relay card 



Hello Steve, 


To be able to wire the APC UPS's relay card that we installed on Tuesday to the PLC, we will need an adapter to convert the 25-pin d-sub connector to a terminal block. 


Would Hall C have one of these adapters on hand? 

If not, I can submit a PR for one. 


Best regards, 

Tyler 

_______________________________________________ 
Dsg-hallc_controls mailing list 
Dsg-hallc_controls at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallc_controls 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_controls/attachments/20180705/de49fadb/attachment.html>