[Dsg-hallc_controls] connector-to-terminal-block adapter needed for APC UPS relay card

[Tyler Lemon]

We plan on using an existing digital input module. 

What we need is an adapter to go from the 37-pin connector Mindy wired to the UPS relay card to a terminal block that can be used to make the necessary connections to the PLC. (Note: I made a typo in my previous email. We need one for a 37-pin connector, not 25-pin) 

For reference, attached is a picture of what is needed. 

-Tyler 


From: "Steve Lassiter" <lassiter at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Cc: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
Sent: Thursday, July 5, 2018 9:17:06 AM 
Subject: Re: [Dsg-hallc_controls] connector-to-terminal-block adapter needed for APC UPS relay card 

Yes we have a few A/B terminal blocks available. But dont you need to use a terminal block that is already connected to a module? Are you proposing to add a new module? 

Steven 


From: "Tyler Lemon" <tlemon at jlab.org> 
To: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
Sent: Thursday, July 5, 2018 9:09:07 AM 
Subject: [Dsg-hallc_controls] connector-to-terminal-block adapter needed for APC UPS relay card 

Hello Steve, 

To be able to wire the APC UPS's relay card that we installed on Tuesday to the PLC, we will need an adapter to convert the 25-pin d-sub connector to a terminal block. 

Would Hall C have one of these adapters on hand? 

If not, I can submit a PR for one. 

Best regards, 
Tyler 

_______________________________________________ 
Dsg-hallc_controls mailing list 
Dsg-hallc_controls at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallc_controls 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_controls/attachments/20180705/6c8a7a9f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 37-pin dsub to terminal block adapter.jpg
Type: image/jpeg
Size: 191507 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_controls/attachments/20180705/6c8a7a9f/attachment-0001.jpg>