[Dsg-hallc_controls] HMS controlnet upgrade

[Steve Lassiter]

Thank you Pablo, 

I received a quote from EECO on July 23 for these modules and passed it on to HallC leaders to put in their budget 

Steven 

----- Original Message -----

From: "Pablo Campero" <campero at jlab.org> 
To: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
Cc: "rossi patrizia" <rossi at jlab.org> 
Sent: Thursday, July 26, 2018 5:28:13 PM 
Subject: Re: [Dsg-hallc_controls] HMS controlnet upgrade 



Hello Steve, 


To update HMS PLC to its version 20.58 it will be required the acquisition of the RM2 (x2), CN2 (x2), and EN2T(x2) PLC modules; modules are showed in red in the picture bellow. 



A quotation received from Allen Bradley authorized vendor in the area, indicates that the cost for all mentioned PLC modules is $ 20,093. 




Best Regards, 
Pablo ----- Original Message -----

From: "Pablo Campero" <campero at jlab.org> 
To: "Steve Lassiter" <lassiter at jlab.org> 
Cc: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
Sent: Tuesday, July 24, 2018 2:38:44 PM 
Subject: Re: [Dsg-hallc_controls] HMS controlnet upgrade 




Hi Steve, 

I confirmed with Rockwell's technical support that 1756-CNB Controlnet modules used for the HMS Remote PLC chassis (x5) do not need to be replaced; we only need to replace CNB/D Controlnet modules by CN2 Controlnet modules in the Primary and Secondary HMS PLC chassis. 

1756-RM2 is the newer version of the 1756-RM redundant module, 1756-RM2 modules have improved features like faster communication between them (1000 Mbps), redundant fiber ports, long distance connections between RM modules (up to 10 Km) and the most important as Brian mentioned this 1756-RM2 modules are supported with the firmware controller 20.58. 

The 1756-ENBT modules (x2) that will be replaced in the Primary and Secondary HMS PLC chassis can be used in the HMS Remote PLC chassis if it is desired. 

Based on this information, the following components will be needed for the upgrades: 

Item # 	Quantity 	Module 	Latest Module Series compatible with required upgrade (20.58) 
1 	2 	1756-RM2 	A 
2 	2 	1756-EN2T 	D 
3 	2 	1756-CN2 	C 

Note: early series for EN2T modules (eg. Series B,C) and CN2 modules (eg. Series B) are also supported with 20.58 firmware. 


Best Regards, 

Pablo ----- Original Message -----

From: "Brian Eng" <beng at jlab.org> 
To: "Steve Lassiter" <lassiter at jlab.org> 
Cc: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
Sent: Monday, July 23, 2018 4:20:24 PM 
Subject: Re: [Dsg-hallc_controls] HMS controlnet upgrade 


I'm not sure about the CNB ControlNet modules in a remote chassis. While I think they will work, Rockwell will need to be contacted to get confirmation. 

On the bright side we know we can use the current ENBT modules from the HMS primary/secondary chassis in the remote chassis as we've already done this on SHMS. 

The 1756-RM2 is supported with 20.58 firmware. 

> On Jul 23, 2018, at 3:58 PM, Steve Lassiter <lassiter at jlab.org> wrote: 
> 
> HI, 
> 
> In upgrading the redundancy modules and controlnet modules for the HMS to accommodating V20.4, will the the control net modules in the remote chassis need to be upgraded as well? 
> 
> Also the 1756RM is no longer available. The 1756RM2 is what they offered. Any issues with this version of the module? 
> 
> Thanks 
> Steven 

_______________________________________________ 
Dsg-hallc_controls mailing list 
Dsg-hallc_controls at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallc_controls 

_______________________________________________ 
Dsg-hallc_controls mailing list 
Dsg-hallc_controls at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallc_controls 

_______________________________________________ 
Dsg-hallc_controls mailing list 
Dsg-hallc_controls at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallc_controls 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_controls/attachments/20180727/06b65dbe/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: undefined
Type: image/png
Size: 40873 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_controls/attachments/20180727/06b65dbe/attachment-0001.png>