[Dsg-hallc_controls] Fwd: [EXTERNAL] CAEN Connector Pin Question

[Brian Eng]

In regards to Brad's previous email about the potting material here's one of the emails CAEN sent.

Still waiting on more feedback since we've definitely seen it on the board side multiple times.

Begin forwarded message:

From: Gianni Di Maio <g.dimaio at caen.it<mailto:g.dimaio at caen.it>>
Subject: Re: [EXTERNAL] CAEN Connector Pin Question
Date: February 6, 2020 at 5:42:31 PM EST
To: Brian Eng <beng at jlab.org<mailto:beng at jlab.org>>
Cc: Greg Kibilko <greg at setechsales.com<mailto:greg at setechsales.com>>

Dear Brian,

please could you tell me if the pins pushed out are present only on the RADIALL connector installed on the boards (female)  or even on the RADIALL connectors installed on the cables ( male).
>From my experience usually in the past the problem appeared only on cable side, this is the reason that we decided to add the hot glue, in order to strengthen the tightness of the pin and prevent a possible escape from the correct position, but this as said only for the cable connector.
The problem on the panel connector is very rare, how many problematic boards you have  with pins pushed out?
Could you send me some pictures?

Best regards.
Gianni

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_controls/attachments/20200213/bcac0ef5/attachment.html>