[Dsg-hallc_nps] PR for Radiall connectors, etc.

[Aaron Brown]

Hi Steve,

It is my understanding that each of these connectors (Radiall 52-pin) can accommodate up to 48 channels. With the 40 connectors we have ordered we should be able to handle up to ~1900 channels.

Aaron
________________________________
From: Stephen Wood <saw at jlab.org>
Sent: Wednesday, August 19, 2020 3:04 PM
To: Aaron Brown <ambrown at jlab.org>
Cc: Brad Sawatzky <brads at jlab.org>; Dsg-hallc_nps at jlab.org <Dsg-hallc_nps at jlab.org>
Subject: Re: [Dsg-hallc_nps] PR for Radiall connectors, etc.

Is this enough connectors?  I think the number of blocks in NPS is 1080 (30x36).  If each connector handles 24 channels, we would need 45.  Perhaps we already have some connectors in hand?  Do we need any spares?

Steve

On Aug 19, 2020, at 1:40 PM, Aaron Brown <ambrown at jlab.org<mailto:ambrown at jlab.org>> wrote:

Hi Brad,

Just to keep you in the loop, I have submitted the PR for the Radiall connectors (40), the crimper (1), and the extraction/insertion tool (1) for approval.
The PR # is 396555.

--Aaron
_______________________________________________
Dsg-hallc_nps mailing list
Dsg-hallc_nps at jlab.org<mailto:Dsg-hallc_nps at jlab.org>
https://mailman.jlab.org/mailman/listinfo/dsg-hallc_nps

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_nps/attachments/20200819/8c0e4f30/attachment-0001.html>