[Dsg-hallc_nps] Radiall connector

[Mindy Leffel]

I have a new issue with the Radiall connectors. The last five connectors I tried to attach have strain relief screws that won't tighten. I tried one from a previous order, it tightened properly. The first picture shows the strain relief attached to a connector. The second picture is a top view of the strain relief. They look like they're made of different materials, the old ones are shinier. The last picture is a side by side view, the screw holes look like the depths are different.

The screws are slightly loose in the holes, even before I try to attach them to the connector. Poor quality control?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_nps/attachments/20210107/da11578e/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Inked radiall connector_LI.jpg
Type: image/jpeg
Size: 998840 bytes
Desc: Inked radiall connector_LI.jpg
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_nps/attachments/20210107/da11578e/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: radiall top.jpg
Type: image/jpeg
Size: 229180 bytes
Desc: radiall top.jpg
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_nps/attachments/20210107/da11578e/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: radiall side.jpg
Type: image/jpeg
Size: 195453 bytes
Desc: radiall side.jpg
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_nps/attachments/20210107/da11578e/attachment-0005.jpg>