[Dsg-hallc_nps] [EXTERNAL] Re: NPS Testing/Assembly

[Mindy Leffel]

No. Most of them are still in boxes. I'll just stack them.
________________________________
From: Aaron Brown <ambrown at jlab.org>
Sent: Friday, April 1, 2022 8:44 AM
To: Dsg-hallc_nps at jlab.org <dsg-hallc_nps at jlab.org>; Mindy Leffel <leffel at jlab.org>
Subject: Fw: [EXTERNAL] Re: NPS Testing/Assembly

Hi Mindy,

Brad says that we can place the high voltage supply cables in the far-right corner of the EEL/126 by the cabinets once (see below) you've finished potting the Radiall connectors.
Do you think a basket or something to put them in would be useful?

-- Aaron
________________________________
From: Brad Sawatzky <brads at jlab.org>
Sent: Thursday, March 31, 2022 3:44 PM
To: Aaron Brown <ambrown at jlab.org>
Subject: [EXTERNAL] Re: NPS Testing/Assembly

The far-right corner of EEL/126 by the cabinets (if you're looking into
the room from the door would be good.  Do you need a basket or something
for them?

-- Brad

On Thu, 31 Mar 2022, Aaron Brown wrote:

> Hi Brad,
> Thanks for the response (and sorry for my late response).
> One additional question:
> Mindy has started potting the radiall connectors for the high voltage supply
> cables.
> I believe this is the last thing she needs to do with them.
> Where would you like her to put them when she's done?
> Thanks,
> Aaron
>
> ----------------------------------------------------------------------------
>

> From: Brad Sawatzky <brads at jlab.org>
> Sent: Monday, March 28, 2022 4:31 PM
> To: Aaron Brown <ambrown at jlab.org>
> Subject: [EXTERNAL] Re: NPS Testing/Assembly
>
> Hi Aaron,
>
> We will need the full complement of HV cables and HV controls screens.
>
> The plan is to do a complete checkout of all hardware (HV, DAQ, Chiller,
> LED pulser) and associated slow controls software this summer.
>
> Incidentally, the SBS/GEM folks may approach you about Radiall HV
> connectors and cabling.  Please keep me in the loop before allocating
> any of the supplies I purchased for NPS.  We can probably make a deal
> with them, but they are going to have to provide some details first.
> (I've been in touch with Holly on this, and it sounds like they have a
> near term work around, but will need something more permanent for the
> Fall.)
>
> FYI, I'm on vacation for this week and will be back in town Apr 5, so I
> may be slow to respond to emails, etc.
>
> All the best,
> -- Brad
>
> On Mon, 28 Mar 2022, Aaron Brown wrote:
>
> > Hi Brad,
> > Just wanted to touch base with you regarding a couple of items.
> > What would be needed to test the detector outside of the hall in terms of
> > controls and high voltage?
> > Would you need all of the hv supply cables?
> > What kind of control screens?
> > Thanks.
> > -- Aaron
>
--
Brad Sawatzky (he/him), PhD <brads at jlab.org> -<>- Jefferson Lab/ Hall C/C111
Ph: 757-269-5947  -<>-  Fax: 757-269-5235  -<>- Pager: brads-page at jlab.org
The most exciting phrase to hear in science, the one that heralds new
  discoveries, is not "Eureka!" but "That's funny..."   -- Isaac Asimov
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_nps/attachments/20220401/c01e9812/attachment-0001.html>