[Dsg-hallc_nps] Fw: detector assembly

[Aaron Brown]

________________________________
From: Carlos Munoz Camacho <munoz at jlab.org>
Sent: Wednesday, April 6, 2022 10:56 AM
To: Aaron Brown <ambrown at jlab.org>
Subject: Re: detector assembly

Hi Aaron,

   There is the HV and the LV cables (outside the NPS frame) that are needed, and the slow controls. For slow controls, we have the sensors but also the control of the board that drives the LEDs we have in the crystals. That's already a lot! :)

You're more than welcome to install and test some sensors during the assembly (early June). At the meeting next week I will present our suggestion for the additional sensors you proposed.

Best,
Carlos

On Tue, Apr 5, 2022 at 7:52 PM Aaron Brown <ambrown at jlab.org<mailto:ambrown at jlab.org>> wrote:
Hi Carlos,

Is there anything other than high voltage cables and controls that will be needed from DSG for assembly this summer?
Also, would it be possible for us to place some sensors in the detector during assembly? Items like leak detection cables, temperature and humidity sensors, etc.?

Thanks,
Aaron
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_nps/attachments/20220406/6e21d15c/attachment.html>