[Dsg-hallc_nps] low voltage connector question

[Aaron Brown]

Thank you, Carlos.
This is very helpful.
One additional question:
      The cable that connects to the bottom face of the low voltage distribution PCB, would you (or Thi) know the specs for that cable? I specifically need to know the wire gauge and the number of conductors.

Thanks,
Aaron
________________________________
From: Carlos Munoz Camacho <munoz at jlab.org>
Sent: Wednesday, December 7, 2022 1:08 PM
To: Aaron Brown <ambrown at jlab.org>
Cc: Dsg-hallc_nps at jlab.org <dsg-hallc_nps at jlab.org>
Subject: Re: [Dsg-hallc_nps] low voltage connector question

Hi Aaron,

   the part number is
https://www.digikey.fr/fr/products/detail/phoenix-contact/1757022/260380

You can have some info on the pinout here:
https://wiki.jlab.org/cuawiki/index.php/Low_voltage

but there is some French in the documents. I can ask Thi for details
is you have any specific question.

Best,
Carlos


On Wed, Dec 7, 2022 at 5:34 PM Aaron Brown via Dsg-hallc_nps
<dsg-hallc_nps at jlab.org> wrote:
>
> Hi,
>
> Attached is a photo of the connectors for the low voltage cables inside of the NPS detector.
> Does anyone have a part number for these connectors, or any information about these cables?
> Specifically I'm looking for the pinout and part numbers.
>
> Thanks,
> Aaron
> _______________________________________________
> Dsg-hallc_nps mailing list
> Dsg-hallc_nps at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hallc_nps
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_nps/attachments/20221207/043a2029/attachment.html>