[dsg-halld_magnets] Hall D Solenoid PXI ADC calibration

[Timothy Whitlatch]

Hi Tyler,

Do you need power in the magnet?

Tim

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: dsg-halld_magnets <dsg-halld_magnets-bounces at jlab.org> on behalf of Hovanes Egiyan <hovanes at jlab.org>
Sent: Thursday, August 18, 2022 7:04:51 PM
To: Tyler Lemon <tlemon at jlab.org>; dsg-halld_magnets at jlab.org <dsg-halld_magnets at jlab.org>
Subject: Re: [dsg-halld_magnets] Hall D Solenoid PXI ADC calibration

Hi Tyler,

That's fine with me. I am also CC-ing this to Mark Stevens.

Hovanes



Sent from my Galaxy



-------- Original message --------
From: Tyler Lemon <tlemon at jlab.org>
Date: 8/18/22 4:25 PM (GMT-05:00)
To: dsg-halld_magnets at jlab.org
Subject: [dsg-halld_magnets] Hall D Solenoid PXI ADC calibration

Hi Tim and Hovanes,

Since Hall D is open for a maintenance period, it would be a good time to also do the ADC calibration for the Solenoid's PXI.

Can this calibration be scheduled for this coming Monday, August 22?

The general plan of action would be:
1. In the morning (~9:00AM), move and set up our DC calibrator to Hall D at the PXI
2. Power on calibrator and leave it for a few hours to let it warm up to its normal operating temperature
3. In the afternoon (~1:30PM), start the calibration of all PXI ADC modules

Is there anything I would need to do before starting Monday (disabling any alarms, filling out a task list, scheduling with someone else, ...)?


-Tyler
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halld_magnets/attachments/20220818/90667136/attachment-0001.html>