[dsg-hdice] NMR set ramp rate

[Xiangdong Wei]

Amanda, 

Thank you for the info, I'll take a look of it either today or tomorrow, when I am not in the Hall-B collaboration meeting. 

On the NMR field ramping: There was 1 gauss (0.0001Tesla) short on the 3rd sweep during the test last night. (It was set to 0.6008T but not 0.6007T as shown in the attached picture.) I haven't had a chance to see how often it happens yet. 

Thanks, 

Xiangdong 



Xiangdong Wei 

x-5266 


From: "Amanda Hoebel" <amandah at jlab.org> 
To: dsg-hdice at jlab.org 
Sent: Tuesday, October 3, 2017 8:52:48 AM 
Subject: [dsg-hdice] NMR set ramp rate 

Hi Xiangdong, 

I noticed on the power supply manual control section of the NMR program there is a "set ramp rate" feature. I found you can enter in your desired ramp rate and select the OK button beside it before a run is started. Doing this will allow the power supply to ramp to the desired field setting using the new ramp rate once a run is started. 

Regards, 
Amanda 
_______________________________________________ 
dsg-hdice mailing list 
dsg-hdice at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hdice 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hdice/attachments/20171003/f278c39e/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_9807.jpg
Type: image/jpeg
Size: 678882 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hdice/attachments/20171003/f278c39e/attachment-0002.jpg>