[Eg6_analysis] [Lowq] Meeting tomorrow
Dupré Raphaël
raphael.dupre at gmail.com
Thu Dec 16 10:21:22 EST 2010
Hi Lamiaa,
If it is not too much work I would like to have as much files as possible,
so including the B files.
For all those runs I would like to have TPCC and GCPB banks included.
Thanks,
Raphael
On Thu, Dec 16, 2010 at 10:06 AM, Lamiaa El Fassi <lamiomar at gmail.com>wrote:
> Hi Stepan,
>
> I just forgot to mention in my previous email that this cooking outputs
> will be saved on
> SILO like pass0_v1 outputs.
>
> Best,
>
>
> Lamiaa
>
> ************************************************************
> * Lamiaa El Fassi email: elfassi at jlab.org
> * Research Associate @ Rutgers University
> * Phone: (757) 269-7011 // Fax: (757) 269-5703
> * Jefferson Lab., 12000 Jefferson Ave.
> * Suite# 4, MS 12H3
> * Newport News, VA. 23606
> ************************************************************
>
>
> On Thu, Dec 16, 2010 at 8:42 AM, Lamiaa El Fassi <lamiomar at gmail.com>
> wrote:
>
>> Hi Stepan,
>>
>> For the software, I will leave the two outputs [1] & [3] combined for this
>> cooking too.
>> However, I will add the helicity modification when Raffaella is done with
>> it.
>>
>> As for 1.2 GeV runs, we have two run periods. First from 61216 till 61482
>> with
>> 109 production runs. Second set is from 61931 till 61966 with 25
>> production runs.
>> So, a total of 134 runs will be processed. Those run numbers is based on
>> the list
>> of good runs study that I did after the pass0_v1 cooking. Some of these
>> runs are
>> very long. They contain more than hundred files which means A* and B*
>> extension
>> on the raw data. Until now I am processing just the A extension, shall I
>> add the B files
>> also to this cooking? I can expect that this cooking will be done in
>> maximum one week
>> depends on how much Auger will be busy in this period?
>>
>> As for the output files, usually I am producing just the SEB NT10 ntuple
>> and the BOS
>> files when I am cooking to Raphael. But in case some other people might be
>> interested
>> to analyse these data, I may produce the full list of output files:
>> - ROOT files: CLASTOOL & H2ROOT root ntuples.
>> - SEB Nt10 ntuple.
>> - BOS files
>> - ANAHIST hbook file
>> - Helicity correction file
>> - LOG files
>> I will manage to save the SEB ntuple in the claseg6 work disk and copy all
>> others files to
>> the auto-managed work disk but they will be linked to the claseg6 work
>> disk. I will leave the
>> IC banks active on those outputs but if there is no objection I may turn
>> off the hodoscope
>> banks.
>>
>>
>> Best regards,
>>
>> Lamiaa
>>
>> ************************************************************
>> * Lamiaa El Fassi email: elfassi at jlab.org
>> * Research Associate @ Rutgers University
>> * Phone: (757) 269-7011 // Fax: (757) 269-5703
>> * Jefferson Lab., 12000 Jefferson Ave.
>> * Suite# 4, MS 12H3
>> * Newport News, VA. 23606
>> ************************************************************
>>
>>
>> On Wed, Dec 15, 2010 at 11:28 PM, Stepan Stepanyan <stepanya at jlab.org>
>> wrote:
>>
>>> Hi Lamiaa,
>>>
>>> You can leave changes for DC as they are, no problem.
>>> For 1.2 GeV one output [1] will be enough. But if you
>>> do not want to touch the code you can leave as it is
>>> [1] and [3]. Since this is again mostly for Raphael for
>>> the RTPC calibration, we do not want to select events
>>> with restriction on a track in RTPC.
>>>
>>> How long the cooking of 1.2 GeV takes, all the files of
>>> all good runs.
>>>
>>> Thanks, Stepan
>>>
>>> On 12/15/10 2:46 AM, Lamiaa El Fassi wrote:
>>>
>>> Hi Stepan,
>>>
>>> Up to now, user_ana codes are up-to-date since we didn't do any changes
>>> since
>>> the previous cooking except the DC initial fit parameters that I changed
>>> to make
>>> them similar to dc3. Shall I leave them like that?
>>> In the previous cooking we decided to combine
>>> - [1] a negatively charged TB track
>>> - [3] a positively charged track with at least 2 neutrals (in any EC - IC
>>> combinations)
>>> in the produced bos file. We turned off the other two outputs:
>>> - [2] a good electron and a positively charged particle (I made a change)
>>> - [4] at least 1 track in RTPC and at least 2 neutrals in (any EC - IC
>>> combinations)
>>>
>>> I think last cooking choice is okay for the RTPC calibration since I
>>> already used it on
>>> some cooking for Raphael, unless you may want to add the RTPC track to
>>> this
>>> cooking outputs. Please let me know which output configuration shall we
>>> use in this
>>> cooking.
>>>
>>> I will wait for the new helicity modification by Raffaella to implement
>>> it into our
>>> cooking packages. She already contacted me to get the tcl file to run
>>> some test
>>> after the helicity modification that she did to her cooking codes
>>> version.
>>>
>>> Best regards,
>>>
>>> Lamiaa
>>>
>>>
>>> ************************************************************
>>> * Lamiaa El Fassi email: elfassi at jlab.org
>>> * Research Associate @ Rutgers University
>>> * Phone: (757) 269-7011 // Fax: (757) 269-5703
>>> * Jefferson Lab., 12000 Jefferson Ave.
>>> * Suite# 4, MS 12H3
>>> * Newport News, VA. 23606
>>> ************************************************************
>>>
>>>
>>> On Tue, Dec 14, 2010 at 9:32 AM, Stepan Stepanyan <stepanya at jlab.org>
>>> wrote:
>>>
>>>> Hi Lamiaa,
>>>>
>>>> On the meeting today we decided to not wait for IC calibration
>>>> and cook 1.2 GeV for Raphael for RTPC work. What we need to
>>>> do is to make sure code is up to date. Raffaella mentioned that
>>>> she can add helicity calculations into it within this week. For
>>>> 1.2 GeV we do not need any output but electron events.
>>>> Let's work towards having everything ready for 1.2 GeV cooking,
>>>> all of the good runs, by the end of the week. Let me know what
>>>> we are missing and what we need to accomplish this goal.
>>>>
>>>> Thanks, Stepan
>>>>
>>>>
>>>> On 12/13/10 9:49 PM, Lamiaa El Fassi wrote:
>>>>
>>>> Hi Stepan,
>>>>
>>>> Sure we can talk about that whenever you want. Please let me know when
>>>> it's convenient for you and I will call you.
>>>>
>>>> Best regards,
>>>>
>>>> Lamiaa
>>>>
>>>> ************************************************************
>>>> * Lamiaa El Fassi email: elfassi at jlab.org
>>>> * Research Associate @ Rutgers University
>>>> * Phone: (757) 269-7011 // Fax: (757) 269-5703
>>>> * Jefferson Lab., 12000 Jefferson Ave.
>>>> * Suite# 4, MS 12H3
>>>> * Newport News, VA. 23606
>>>> ************************************************************
>>>>
>>>>
>>>> On Mon, Dec 13, 2010 at 6:23 PM, Stepan Stepanyan <stepanya at jlab.org>
>>>> wrote:
>>>>
>>>>> Hi Lamiaa,
>>>>>
>>>>> Thanks for the email. Sorry we did not cross today. I am
>>>>> on "vacation" but I come for few meetings.
>>>>>
>>>>> One thing I wanted to talk to you is the preparation of the
>>>>> software for the next cooking, including outputs. I guess
>>>>> we can do it offline.
>>>>>
>>>>> Have a safe flight.
>>>>>
>>>>> Stepan
>>>>>
>>>>> On 12/13/10 6:10 PM, Lamiaa El Fassi wrote:
>>>>>
>>>>> Hi Stepan,
>>>>>
>>>>> I was willing to stop by to talk to you today but I didn't have a
>>>>> chance to do so and it seems you are on vacation. I am leaving tomorrow
>>>>> morning and I am not able to attend the meeting since my flight is on the
>>>>> same meeting time.
>>>>>
>>>>> Best regards,
>>>>>
>>>>> Lamiaa
>>>>>
>>>>> *Sent from my MOTOBLUR™ smartphone on AT&T*
>>>>>
>>>>>
>>>>> -----Original message-----
>>>>>
>>>>> *From: *Stepan Stepanyan <stepanya at jlab.org> <stepanya at jlab.org>*
>>>>> To: *eg6_analysis at jlab.org, lowq at jlab.org*
>>>>> Sent: *Mon, Dec 13, 2010 16:50:34 GMT+00:00*
>>>>> Subject: *[Lowq] Meeting tomorrow
>>>>>
>>>>> Dear all,
>>>>>
>>>>> We will have eg6 meeting tomorrow Tuesday, December 14, at 9:30am
>>>>> in room B101.
>>>>> Agenda items can be found at -
>>>>>
>>>>> http://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Meeting_on_December_14_at_9:30am
>>>>>
>>>>> Calling instructions can be found at :
>>>>>
>>>>> http://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Agendas_and_Minutes_of_the_meetings
>>>>> .
>>>>>
>>>>>
>>>>> Regards, Stepan
>>>>>
>>>>> _______________________________________________
>>>>> Lowq mailing list
>>>>> Lowq at jlab.org
>>>>> https://mailman.jlab.org/mailman/listinfo/lowq
>>>>>
>>>>>
>>>>
>>>
>>
>
> _______________________________________________
> Eg6_analysis mailing list
> Eg6_analysis at jlab.org
> https://mailman.jlab.org/mailman/listinfo/eg6_analysis
>
>
--
Raphaël Dupré
Argonne National Laboratory
Université Claude Bernard Lyon 1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20101216/1f7657aa/attachment.html
More information about the Eg6_analysis
mailing list