[Eg6_analysis] [Lowq] Meeting tomorrow
Stepan Stepanyan
stepanya at jlab.org
Thu Dec 16 11:06:56 EST 2010
Hi Lamiaa,
Please cook everything A** and B** files. Week of cooking seems just
on time before holidays.
I assume you are talking about IC reconstruction banks. If we keep IC
information I would prefer to have hodoscope's reconstruction banks
as well, SCHB and SCPB.
One question, what you will name this pass, Pass0_v2?
Stepan
On 12/16/10 9:42 AM, Lamiaa El Fassi wrote:
> Hi Stepan,
>
> For the software, I will leave the two outputs [1] & [3] combined for
> this cooking too.
> However, I will add the helicity modification when Raffaella is done
> with it.
>
> As for 1.2 GeV runs, we have two run periods. First from 61216 till
> 61482 with
> 109 production runs. Second set is from 61931 till 61966 with 25
> production runs.
> So, a total of 134 runs will be processed. Those run numbers is based
> on the list
> of good runs study that I did after the pass0_v1 cooking. Some of
> these runs are
> very long. They contain more than hundred files which means A* and B*
> extension
> on the raw data. Until now I am processing just the A extension, shall
> I add the B files
> also to this cooking? I can expect that this cooking will be done in
> maximum one week
> depends on how much Auger will be busy in this period?
>
> As for the output files, usually I am producing just the SEB NT10
> ntuple and the BOS
> files when I am cooking to Raphael. But in case some other people
> might be interested
> to analyse these data, I may produce the full list of output files:
> - ROOT files: CLASTOOL & H2ROOT root ntuples.
> - SEB Nt10 ntuple.
> - BOS files
> - ANAHIST hbook file
> - Helicity correction file
> - LOG files
> I will manage to save the SEB ntuple in the claseg6 work disk and copy
> all others files to
> the auto-managed work disk but they will be linked to the claseg6 work
> disk. I will leave the
> IC banks active on those outputs but if there is no objection I may
> turn off the hodoscope
> banks.
>
> Best regards,
>
> Lamiaa
>
> ************************************************************
> * Lamiaa El Fassi email: elfassi at jlab.org
> <mailto:elfassi at jlab.org>
> * Research Associate @ Rutgers University
> * Phone: (757) 269-7011 // Fax: (757) 269-5703
> * Jefferson Lab., 12000 Jefferson Ave.
> * Suite# 4, MS 12H3
> * Newport News, VA. 23606
> ************************************************************
>
>
> On Wed, Dec 15, 2010 at 11:28 PM, Stepan Stepanyan <stepanya at jlab.org
> <mailto:stepanya at jlab.org>> wrote:
>
> Hi Lamiaa,
>
> You can leave changes for DC as they are, no problem.
> For 1.2 GeV one output [1] will be enough. But if you
> do not want to touch the code you can leave as it is
> [1] and [3]. Since this is again mostly for Raphael for
> the RTPC calibration, we do not want to select events
> with restriction on a track in RTPC.
>
> How long the cooking of 1.2 GeV takes, all the files of
> all good runs.
>
> Thanks, Stepan
>
> On 12/15/10 2:46 AM, Lamiaa El Fassi wrote:
>> Hi Stepan,
>>
>> Up to now, user_ana codes are up-to-date since we didn't do any
>> changes since
>> the previous cooking except the DC initial fit parameters that I
>> changed to make
>> them similar to dc3. Shall I leave them like that?
>> In the previous cooking we decided to combine
>> - [1] a negatively charged TB track
>> - [3] a positively charged track with at least 2 neutrals (in any
>> EC - IC combinations)
>> in the produced bos file. We turned off the other two outputs:
>> - [2] a good electron and a positively charged particle (I made a
>> change)
>> - [4] at least 1 track in RTPC and at least 2 neutrals in (any
>> EC - IC combinations)
>>
>> I think last cooking choice is okay for the RTPC calibration
>> since I already used it on
>> some cooking for Raphael, unless you may want to add the RTPC
>> track to this
>> cooking outputs. Please let me know which output configuration
>> shall we use in this
>> cooking.
>>
>> I will wait for the new helicity modification by Raffaella to
>> implement it into our
>> cooking packages. She already contacted me to get the tcl file to
>> run some test
>> after the helicity modification that she did to her cooking codes
>> version.
>>
>> Best regards,
>>
>> Lamiaa
>>
>>
>> ************************************************************
>> * Lamiaa El Fassi email: elfassi at jlab.org
>> <mailto:elfassi at jlab.org>
>> * Research Associate @ Rutgers University
>> * Phone: (757) 269-7011 // Fax: (757) 269-5703
>> * Jefferson Lab., 12000 Jefferson Ave.
>> * Suite# 4, MS 12H3
>> * Newport News, VA. 23606
>> ************************************************************
>>
>>
>> On Tue, Dec 14, 2010 at 9:32 AM, Stepan Stepanyan
>> <stepanya at jlab.org <mailto:stepanya at jlab.org>> wrote:
>>
>> Hi Lamiaa,
>>
>> On the meeting today we decided to not wait for IC calibration
>> and cook 1.2 GeV for Raphael for RTPC work. What we need to
>> do is to make sure code is up to date. Raffaella mentioned that
>> she can add helicity calculations into it within this week. For
>> 1.2 GeV we do not need any output but electron events.
>> Let's work towards having everything ready for 1.2 GeV cooking,
>> all of the good runs, by the end of the week. Let me know what
>> we are missing and what we need to accomplish this goal.
>>
>> Thanks, Stepan
>>
>>
>> On 12/13/10 9:49 PM, Lamiaa El Fassi wrote:
>>> Hi Stepan,
>>>
>>> Sure we can talk about that whenever you want. Please let me
>>> know when
>>> it's convenient for you and I will call you.
>>>
>>> Best regards,
>>>
>>> Lamiaa
>>>
>>> ************************************************************
>>> * Lamiaa El Fassi email: elfassi at jlab.org
>>> <mailto:elfassi at jlab.org>
>>> * Research Associate @ Rutgers University
>>> * Phone: (757) 269-7011 // Fax: (757) 269-5703
>>> * Jefferson Lab., 12000 Jefferson Ave.
>>> * Suite# 4, MS 12H3
>>> * Newport News, VA. 23606
>>> ************************************************************
>>>
>>>
>>> On Mon, Dec 13, 2010 at 6:23 PM, Stepan Stepanyan
>>> <stepanya at jlab.org <mailto:stepanya at jlab.org>> wrote:
>>>
>>> Hi Lamiaa,
>>>
>>> Thanks for the email. Sorry we did not cross today. I am
>>> on "vacation" but I come for few meetings.
>>>
>>> One thing I wanted to talk to you is the preparation of the
>>> software for the next cooking, including outputs. I guess
>>> we can do it offline.
>>>
>>> Have a safe flight.
>>>
>>> Stepan
>>>
>>> On 12/13/10 6:10 PM, Lamiaa El Fassi wrote:
>>>> Hi Stepan,
>>>>
>>>> I was willing to stop by to talk to you today but I
>>>> didn't have a chance to do so and it seems you are on
>>>> vacation. I am leaving tomorrow morning and I am not
>>>> able to attend the meeting since my flight is on the
>>>> same meeting time.
>>>>
>>>> Best regards,
>>>>
>>>> Lamiaa
>>>>
>>>> */Sent from my MOTOBLUR™ smartphone on AT&T/*
>>>>
>>>>
>>>> -----Original message-----
>>>>
>>>> *From: *Stepan Stepanyan <stepanya at jlab.org>
>>>> <mailto:stepanya at jlab.org>*
>>>> To: *eg6_analysis at jlab.org
>>>> <mailto:eg6_analysis at jlab.org>, lowq at jlab.org
>>>> <mailto:lowq at jlab.org>*
>>>> Sent: *Mon, Dec 13, 2010 16:50:34 GMT+00:00*
>>>> Subject: *[Lowq] Meeting tomorrow
>>>>
>>>> Dear all,
>>>>
>>>> We will have eg6 meeting tomorrow Tuesday, December
>>>> 14, at 9:30am
>>>> in room B101.
>>>> Agenda items can be found at -
>>>> http://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Meeting_on_December_14_at_9:30am
>>>>
>>>> Calling instructions can be found at :
>>>> http://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Agendas_and_Minutes_of_the_meetings
>>>>
>>>> .
>>>>
>>>>
>>>> Regards, Stepan
>>>>
>>>> _______________________________________________
>>>> Lowq mailing list
>>>> Lowq at jlab.org <mailto:Lowq at jlab.org>
>>>> https://mailman.jlab.org/mailman/listinfo/lowq
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20101216/01fa0ae2/attachment-0001.html
More information about the Eg6_analysis
mailing list