[Eg6_analysis] Calibration cooking

[Mohammad Hattawy]

Hello Lamiaa,

   For the run lists, we need all the 1.2 GeV runs with 4He target, and the
first file of each run of 5.7 GeV and 6 GeV. If it is easier for you to
pick a fixed number of statistics from each run, I would say we need the
first 400 000 events from all the 6  and 5.7 GeV.
  Regarding the output files, I would say that HROOT is enough. Nathan, do
we need BOS files also?
  For the tcl file, i think it is fine.

Best regards,
Mohammad.


On Wed, Jul 10, 2013 at 3:52 PM, Lamiaa El Fassi <lamiomar at gmail.com> wrote:

> Hi Raphael,
>
> In case the information that you need is included in the TPCC bank, as
> Nathan mentioned,
> I may need to process few runs for you since the TPCC, which is a
> calibration bank, was not
> turned on in the pass1v1 production pass. For this task I am suggesting
> the following:
>
> 1. Could you check different beam energy run lists posted in the cooking
> link (here<https://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Cooking_Notes>)
> and pick
> the runs that you want me to process? Please specify also how much
> statistics you may need
> for each run!
> 2. Could you specify also the type of output files that you need; BOS or
> HROOT files or both?
> In this case I will save the output files only on Volatile disk not on
> Silo.
> 3. Could you check the attached tcl file which I am usually using for the
> RTPC calibration to see
> if all what you need for this RTPC calibration check is included?
>
> Best regards,
>
> Lamiaa
>
>
> On Tue, Jul 9, 2013 at 5:02 PM, Nathan Baltzell <baltzell at anl.gov> wrote:
>
>> Hi Raphaël,
>>
>> Yes, I think the TPCC bank should be sufficient.  It has TDCs, raw ADCs,
>> and also gain-calibrated ADCs for every hit used in the GCPB bank, which
>> has some very loose cuts to remove junk tracks.  Each TPCC hit has a
>> pointer to the GCPB track it was associated with.  That raw information
>> cannot be gotten from only cooked pass1v1 data.
>>
>> Regards,
>> Nathan
>>
>>
>>
>> On Tue, 09 Jul 2013 09:57:52 -0500, Dupré Raphaël <
>> raphael.dupre at gmail.com> wrote:
>>
>>  Dear Lamiaa and Nathan,
>>>
>>> We are starting to work again on the RTPC calibration. One of the
>>> points that we would like to check is that the calibration is not
>>> changing during the run.
>>>
>>> We would need the detailed tpc bank which includes (raw adc, tdc, ...)
>>> for all the 1.2 GeV runs, and the first file of all the 5.7 and 6 GeV
>>> runs.
>>>
>>> My first question to Nathan, does the TPCC bank information is good
>>> for this and does it provides raw ADC? (raw ADC are for other tests
>>> later, but we will eventually need them too) Else, what should we use?
>>>
>>> Then could Lamiaa cook the runs mentionned above? or maybe they can be
>>> extracted from BOS files from the pass1v1 cooking?
>>>
>>> Best regards,
>>>
>>>
>>> --
>>> Raphaël Dupré
>>>
>>
>


-- 
Best regards,
Mohammad Hattawy.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20130711/4b910592/attachment.html