[Eg6_analysis] Calibration cooking

[Nathan Baltzell]

Hello Mohammad,

HROOT with TPCC will have all raw info about all hits in all reconstructed
tracks.  Lamiaa's tcl that was attached does have the "ltpcc_nt_do" flag,
which will turn on the TPCC variables in the ntuple.

-nathan



On Thu, 11 Jul 2013 02:58:48 -0500, Mohammad Hattawy  
<mohammad.hattawy at gmail.com> wrote:

> Hello Lamiaa,
>>   For the run lists, we need all the 1.2 GeV runs with 4He target, and  
>> the first file of each run of 5.7 GeV and 6 GeV. If it is easier for  
>> >you to pick a fixed number of statistics from each run, I would say we  
>> need the first 400 000 events from all the 6  and 5.7 GeV.
>  Regarding the output files, I would say that HROOT is enough. Nathan,  
> do we need BOS files also?  For the tcl file, i think it is fine.
>
> Best regards,Mohammad.
>
>
> On Wed, Jul 10, 2013 at 3:52 PM, Lamiaa El Fassi <lamiomar at gmail.com>  
> wrote:
>> Hi Raphael,
>>
>> In case the information that you need is included in the TPCC bank, as  
>> Nathan mentioned,I may need to process few runs for you since the TPCC,  
>> which is a calibration bank, was notturned on in the pass1v1 production  
>> pass. For this task I am suggesting the following:
>>
>> 1. Could you check different beam energy run lists posted in the  
>> cooking link (here) and pickthe runs that you want me to process?  
>> Please specify also how much statistics you may needfor each run!
>> 2. Could you specify also the type of output files that you need; BOS  
>> or HROOT files or both?In this case I will save the output files only  
>> on Volatile disk not on Silo.3. Could you check the attached tcl file  
>> which I am usually using for the RTPC calibration to seeif all what you  
>> need for this RTPC calibration check is included?
>>
>> Best regards,
>>
>> Lamiaa
>>
>>
>> On Tue, Jul 9, 2013 at 5:02 PM, Nathan Baltzell <baltzell at anl.gov>  
>> wrote:
>>> Hi Raphaël,
>>>
>>> Yes, I think the TPCC bank should be sufficient.  It has TDCs, raw  
>>> ADCs,
>>> and also gain-calibrated ADCs for every hit used in the GCPB bank,  
>>> which
>>> has some very loose cuts to remove junk tracks.  Each TPCC hit has a
>>> pointer to the GCPB track it was associated with.  That raw information
>>> cannot be gotten from only cooked pass1v1 data.
>>>
>>> Regards,
>>> Nathan
>>>
>>>
>>>
>>> On Tue, 09 Jul 2013 09:57:52 -0500, Dupré Raphaël  
>>> <raphael.dupre at gmail.com> wrote:
>>>
>>>> Dear Lamiaa and Nathan,
>>>>
>>>> We are starting to work again on the RTPC calibration. One of the
>>>> points that we would like to check is that the calibration is not
>>>> changing during the run.
>>>>
>>>> We would need the detailed tpc bank which includes (raw adc, tdc, ...)
>>>> for all the 1.2 GeV runs, and the first file of all the 5.7 and 6 GeV
>>>> runs.
>>>>
>>>> My first question to Nathan, does the TPCC bank information is good
>>>> for this and does it provides raw ADC? (raw ADC are for other tests
>>>> later, but we will eventually need them too) Else, what should we use?
>>>>
>>>> Then could Lamiaa cook the runs mentionned above? or maybe they can be
>>>> extracted from BOS files from the pass1v1 cooking?
>>>>
>>>> Best regards,
>>>>
>>>>
>>>> --
>>>> Raphaël Dupré
>>
>
>
>
> --Best regards,
> Mohammad Hattawy.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20130711/4fcc7af1/attachment.html