[Eg6_analysis] Calibration cooking

Mon Jul 15 14:03:04 EDT 2013

Hi Mohammad,

The cooking of 6 GeV dataset is done. You may find the HROOT files in the
following directory:
/volatile/clas/claseg6/gempass1_v1/6gev/HROOT/.

Regards,

Lamiaa

On Mon, Jul 15, 2013 at 9:02 AM, <hattawy at ipno.in2p3.fr> wrote:

> Hello Lamiaa,
>    Thank you very much. This is perfect to process two files.
>
> Best regards,
> Mohammad Hattawy.
>
>
>
> > Hi Mohammad,
> >
> > Upon your request, I have processed the full list of 1.2 GeV 4He runs
> (117
> > runs).
> > The HROOT outputs are saved in the following directory:
> > /volatile/clas/claseg6/gempass1_v1/1p2gev/HROOT/.
> >
> > As for your request to process 400K events for the other beam energies, I
> > processed
> > the first two bosfiles (*.A00 & *.A01) for 5.7 GeV runs since the 1st
> > boshas less than
> > the events requested. These HROOT files are saved in this directory:
> > /volatile/clas/claseg6/gempass1_v1/5p7gev/HROOT/.
> >
> > I am currently processing the same two files of 6 GeV runs even if the
> 1st
> > bos has more
> > than 400K events. In case there is an issue with the 1st bos you may use
> > the second one.
> > I will let you know when the cooking of 6 GeV dataset is done.
> >
> > Regards,
> >
> > Lamiaa
> >
> >
> >
> >
> > On Thu, Jul 11, 2013 at 2:37 PM, Mohammad Hattawy <
> > mohammad.hattawy at gmail.com> wrote:
> >
> >> Hello all,
> >>    So, we all agree that HROOT output files will be enough, and we do
> >> not
> >> need BOS files.
> >> Lamiaa, you can go with the cooking if this is fine.
> >>
> >> Regards,
> >> Mohammad.
> >>
> >>
> >> On Thu, Jul 11, 2013 at 3:09 PM, Nathan Baltzell <baltzell at anl.gov>
> >> wrote:
> >>
> >>> **
> >>> Hello Mohammad,
> >>>
> >>> HROOT with TPCC will have all raw info about all hits in all
> >>> reconstructed
> >>> tracks.  Lamiaa's tcl that was attached does have the "ltpcc_nt_do"
> >>> flag,
> >>> which will turn on the TPCC variables in the ntuple.
> >>>
> >>> -nathan
> >>>
> >>>
> >>>
> >>> On Thu, 11 Jul 2013 02:58:48 -0500, Mohammad Hattawy <
> >>> mohammad.hattawy at gmail.com> wrote:
> >>>
> >>> Hello Lamiaa,
> >>>
> >>>    For the run lists, we need all the 1.2 GeV runs with 4He target, and
> >>> the first file of each run of 5.7 GeV and 6 GeV. If it is easier for
> >>> you to
> >>> pick a fixed number of statistics from each run, I would say we need
> >>> the
> >>> first 400 000 events from all the 6  and 5.7 GeV.
> >>>   Regarding the output files, I would say that HROOT is enough. Nathan,
> >>> do we need BOS files also?
> >>>   For the tcl file, i think it is fine.
> >>>
> >>> Best regards,
> >>> Mohammad.
> >>>
> >>>
> >>> On Wed, Jul 10, 2013 at 3:52 PM, Lamiaa El Fassi
> >>> <lamiomar at gmail.com>wrote:
> >>>
> >>>> Hi Raphael,
> >>>>
> >>>> In case the information that you need is included in the TPCC bank, as
> >>>> Nathan mentioned,
> >>>> I may need to process few runs for you since the TPCC, which is a
> >>>> calibration bank, was not
> >>>> turned on in the pass1v1 production pass. For this task I am
> >>>> suggesting
> >>>> the following:
> >>>>
> >>>> 1. Could you check different beam energy run lists posted in the
> >>>> cooking
> >>>> link
> >>>> (here<
> https://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Cooking_Notes>)
> >>>> and pick
> >>>> the runs that you want me to process? Please specify also how much
> >>>> statistics you may need
> >>>> for each run!
> >>>> 2. Could you specify also the type of output files that you need; BOS
> >>>> or
> >>>> HROOT files or both?
> >>>> In this case I will save the output files only on Volatile disk not on
> >>>> Silo.
> >>>> 3. Could you check the attached tcl file which I am usually using for
> >>>> the RTPC calibration to see
> >>>> if all what you need for this RTPC calibration check is included?
> >>>>
> >>>> Best regards,
> >>>>
> >>>> Lamiaa
> >>>>
> >>>>
> >>>> On Tue, Jul 9, 2013 at 5:02 PM, Nathan Baltzell
> >>>> <baltzell at anl.gov>wrote:
> >>>>
> >>>>> Hi Rapha�l,
> >>>>>
> >>>>> Yes, I think the TPCC bank should be sufficient.  It has TDCs, raw
> >>>>> ADCs,
> >>>>> and also gain-calibrated ADCs for every hit used in the GCPB bank,
> >>>>> which
> >>>>> has some very loose cuts to remove junk tracks.  Each TPCC hit has a
> >>>>> pointer to the GCPB track it was associated with.  That raw
> >>>>> information
> >>>>> cannot be gotten from only cooked pass1v1 data.
> >>>>>
> >>>>> Regards,
> >>>>> Nathan
> >>>>>
> >>>>>
> >>>>>
> >>>>> On Tue, 09 Jul 2013 09:57:52 -0500, Dupr� Rapha�l <
> >>>>> raphael.dupre at gmail.com> wrote:
> >>>>>
> >>>>>  Dear Lamiaa and Nathan,
> >>>>>>
> >>>>>> We are starting to work again on the RTPC calibration. One of the
> >>>>>> points that we would like to check is that the calibration is not
> >>>>>> changing during the run.
> >>>>>>
> >>>>>> We would need the detailed tpc bank which includes (raw adc, tdc,
> >>>>>> ...)
> >>>>>> for all the 1.2 GeV runs, and the first file of all the 5.7 and 6
> >>>>>> GeV
> >>>>>> runs.
> >>>>>>
> >>>>>> My first question to Nathan, does the TPCC bank information is good
> >>>>>> for this and does it provides raw ADC? (raw ADC are for other tests
> >>>>>> later, but we will eventually need them too) Else, what should we
> >>>>>> use?
> >>>>>>
> >>>>>> Then could Lamiaa cook the runs mentionned above? or maybe they can
> >>>>>> be
> >>>>>> extracted from BOS files from the pass1v1 cooking?
> >>>>>>
> >>>>>> Best regards,
> >>>>>>
> >>>>>>
> >>>>>> --
> >>>>>> Rapha�l Dupr�
> >>>>>>
> >>>>>
> >>>>
> >>>
> >>>
> >>> --
> >>> Best regards,
> >>> Mohammad Hattawy.
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >> --
> >> Best regards,
> >> Mohammad Hattawy.
> >>
> > _______________________________________________
> > Eg6_analysis mailing list
> > Eg6_analysis at jlab.org
> > https://mailman.jlab.org/mailman/listinfo/eg6_analysis
> >
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20130715/9aee9171/attachment.html 