[Esr-users] Halls A, B, C and ESR status update

[Dave Kashy]

All,
The 4K supply and return U-tubes for Halls B and C are installed.
Hall C reports that they will not be ready to start cooling until Wednesday morning, thus Hall B will start its 80K to 4K cooling at 08:00 tomorrow.

Dave


----- Original Message -----
From: "kashy" <kashy at jlab.org>
To: "esr-users" <esr-users at jlab.org>
Sent: Monday, July 16, 2018 8:29:37 AM
Subject: [Esr-users] ESR is running and producing Liquid Helium into the 10, 000Liter dewar

Hi All,

Good News! ESR is running and producing liquid Helium. Liquid started to collect yesterday at ~5pm and is now at 18%. The current plan is to install the 3 sets of 4K U-tubes (supply and return) for all 3 halls this afternoon. Cryo will leave the 4K supply and return valves in the ESR Valve box closed (CEV6711X and CEV6721X X being A, B, or C) until each hall and the ESR are ready for flow. The plan is for Hall C to cool first and to get its magnets on cold return as soon a possible. Hall B will wait until Hall C is done unless there is extra capacity or some reason Hall C needs to delay some magnets. Cryo would like to maintain about 40% helium level in its dewar but this can vary somewhat. The main issue is handling the gas and having gas and purifier capacity ready for the 2K pumpdown and cryomodule fills in the Linacs when CHL 1 comes back on line next week.


Please contact me or Joe Wilson or Chris Perry if you have questions.

Dave
_______________________________________________
Esr-users mailing list
Esr-users at jlab.org
https://mailman.jlab.org/mailman/listinfo/esr-users