[Esr-users] [New Logentry] Follow-up Re: Torus Strain Gage Alarm Tripped Again

[kashy at jlab.org]

Logentry Text:
--
Just to be clear this was not a magnet trip it was an alarm triggered.
This signal is related to the force in a Z support in the Torus and is one of two on Coil B
There are similar supports on coils D and F too. 

The alarm values are below 0 and above 2000lbs 
The data logger shows this signal (blue plot) has been alarming for most all of 2025 and has slowly crept up since early 2023 (no data is available using the standard plotting routine) 

We should probably have someone go deeper and look at many signals to see if there any long term trends that could portent something we could avoid or be ready for...
Who is that person? Yes I could do it, but when I retire who is that? There needs to be someone learning this system and that needs to happen soon!

Anyway for now I raised the alarm trigger range from 0-2000 to 400-2400

Dave


---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/4353679
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/esr-users/attachments/20250411/e59a1729/attachment.html>