[G14_run] proposed banks in cooking output files

[Paul Mattione]

I recommend saving the HBID, HBTR, and TBTR banks for hit-based and time-based tracking results (hit-based especially useful for studying tracking efficiencies).  

Is EC1R worth saving? 

 - Paul

On Jan 30, 2014, at 2:47 PM, Franz Klein wrote:

> 
> Hi,
> 
> as we are preparing for pass1 cooking, I'd like to make a proposal for the output saved on tape (and in part on /volatile/clas/clasg14/pass1/v1).
> If you want any additional banks or skims or other data saved, please speak up before we start!
> 
> Cheers,
> Franz
> 
> 
> (A) Proposed data banks in output files:
> notation: 0nnnnn =run number, 
>    Amm =BOS continuation file (i.e. 2GB file within a run), 
>    B0x =cooked BOS file# for raw data file clas_0nnnnn.Amm
> description of the bank entries: see corresponding dll file in $CLAS_PACK/bankdefs
> 
> (1) BOS formatted output: BOS/cooked_0nnnnn.Amm.B0x
> (a) copies from raw data:
> HEAD, RC26, TGBI, RFT, EC1, EC, ECT, SC, SCT, STN0, STN1, (TGTL, TGTR, TAGE,) 
> EPIC, TESC, HLS
> (b) detector reconstruction banks:
> CL01, EC01, ECHB, SCRC, STRE, TAGR, TBER, TDPL, MVRT, VERT, RGLK, (HBER, HDPL, DHCL)
> (c) pid particle banks:
> PART, TBID, GPID (+all banks of group (b))
> (d) SEB particle banks:
> HEVT, EVNT, DCPB, TRPB, ECPB, LCPB, SCPB, STPB, TGPB
> 
> 2) data files for photon polarization calculation (only plane-polar. data):
>  POL/Pol_0nnnnn.Amm.root
> HEAD, RC26, RFT, TAGE, TGTR, TGTL, TAGR, STN0, STN1, STRE, TESC, EPIC
> 
> 3) ROOT formatted output: ROOT/DST_0nnnnn.Amm.B0x.root
> HEAD, RC26, TGBI, RFT, EC1, EC, ECT, SC, SCT, STN0, STN1, EPIC,  
> CL01, EC01, ECHB, SCRC, STRE, TAGR, TBER, TDPL, MVRT, VERT, RGLK, DHCL,
> PART, TBID, GPID, 
> HEVT, EVNT, DCPB, TRPB, ECPB, LCPB, SCPB, STPB, TGPB
> 
> 4) GPID skim (only GPID related banks, including TBER for kinematic fit):
>  SKIMS/DSTgpid_0nnnnn.Amm.B0x.root
> HEAD, TGBI, GPID, TBID, ECHB, SCRC, STRE, TAGR, MVRT, VERT, TBER, EPIC
> 
> 5) K^+ Sigma^- skim: SKIMS/DST_KpSm_0nnnnn.Amm.root
> HEAD, TGBI, EPIC, 
> CL01, ECPB, SCRC, STRE, TBER, TDPL, MVERT, VERT
> HEVT, EVNT, DCPB, ECPB, SCPB, STPB, TGPB
> PART, TBID, GPID
> 
> 6) K^+ Lambda skim: SKIMS/DST_Kp_0nnnnn.Amm.root
> ?same banks as full DST ? (item 3)? or KpSm skim (item 5)?
> 
> 7) p pi^- skim (to be checked: only useful if this skim contains <10% data)
> ?same banks as full DST (item 3)? or KpSm skim (item 5)?
> 
> 
> (B) other output files (on disk /work/clas/clasg14/pass1/v1 and zipped on tape):
> (i) monitor histograms: AnaHistFiles/anahist_0nnnnn_Amm.hbook
> (ii) log files: LOGS/run_0nnnnn_Amm.out (farm job log), xxx.err (error log), xxx.log (user_ana log)
> (iii) trip files (info in 10sec=scaler event intervals): TRIPS/clas_0nnnnn.Amm.trip
> (iv) helicity info: HELCHK/clas_0nnnnn.Amm.hel
> (v) photon flux info: GFLUX/gflux_eb.0nnnnn.Amm.dat, gflux_tc.0nnnnn.Amm.dat, gflux_erg.0nnnnn.Amm.dat 
> 
> 
> -- 
> ===============================================================
>                  Franz J. Klein, Associate Professor 
>                  CUA, Department of Physics
>                  Washington, DC 20064
>  office: Hannan Hall 206          phone: 202-319-6190 
>  or: Jefferson Lab,CC F-243       phone: 757-269-6672 
> ---------------------------------------------------------------
> 
> _______________________________________________
> G14_run mailing list
> G14_run at jlab.org
> https://mailman.jlab.org/mailman/listinfo/g14_run