[Hallb-engineering] Fwd: [HBList] NEW: Power outage for Panel BUPL1

[Douglas Tilles]

To All:

Please look at the list of items that will lose power at 8:00 am Friday morning for the effect on any system or power to any thing you may be concerned with.  It will last for 30 min    there will be not lights on the space frame.

Doug

----- Forwarded Message -----
From: "Joshua Caterbone" <joshuac at jlab.org>
To: "theo" <theo at jlab.org>, tsm at jlab.org, "Bob Miller" <rmiller at jlab.org>, "Stepan Stepanyan" <stepanya at jlab.org>, "Doug Tilles" <tilles at jlab.org>, "Harry W. Fanning" <fanning at jlab.org>, "kujawa" <kujawa at jlab.org>, "Albert Manzlak" <manzlak at jlab.org>, "Bob May" <may at jlab.org>, "Richard Owen" <rowen at jlab.org>, "Joshua Caterbone" <joshuac at jlab.org>
Sent: Wednesday, July 19, 2017 2:45:02 PM
Subject: [HBList] NEW: Power outage for Panel BUPL1

Power outage for Panel BUPL1 
Hazard Identification Worksheet 
Task Hazard Analysis has not been reviewed by EHS&Q group. 
General EHS&Q Hazards 

NO 	Do you require familiarization with the work area and its current state? Do you need to perform a pre-job walkdown? 
NO 	Are there MSDS requirements for the materials being used with which you are unfamilar? 
NO 	Will you be working with or mixing chemicals 
NO 	Will you create silica or nuisance dust? 
NO 	Will you be doing hot work (i.e.: welding, brazing, producing sparks by grinding or cutting ? or using a flame open flame bigger than a bic lighter? 
NO 	Will you be generating, or in an area of, excessive noise? 
NO 	Will you be in or around ionizing radiation , or non-ionizing radiant energy (i.e.: magnetic fields , radio frequency , microwave radiation )? 
NO 	Is the task performed in a confined space (i.e.: limited entry, egress, or poor ventilation exists.)? 
NO 	Does the task require compressed, liquefied, or solidified gases ? 
NO 	Does the task require work with materials subject to temperature extremes (i.e.: cryogenics )? 
NO 	Does the task require work in areas subject to temperature extremes (i.e.: heat stress or cold stress )? 
NO 	Will you be using material handling equipment ( fork trucks / attachments , cranes or hoists , tunnel vehicles , aerial work platforms )? 
YES 	Does the task involve the use of portable hand tools ? 
	Screwdriver, Pliers 
NO 	Does the work involve electrical hazards (i.e.: electronic equipment; construction/modification of electronic equipment; or energized AC electrical equipment )? 
YES 	Will you need to perform Lock, Tag, Try (i.e.: are there hazardous/stored energy sources such as electrical, mechanical, hydraulic, pneumatic, chemical, thermal or other forms of harmful energy that need to be controlled)? 
	LOTO BUPL1 
NO 	Does the task involve working four feet or more above floor level ? 
NO 	Will you be using a ladder or scaffolding ? 
NO 	Does the task involve lifting, pulling, pushing, or carrying heavy objects, or repetitive motion or other ergonomic issues ? 
NO 	Does the task involve work with pressurized or vacuum vessels ? 
NO 	Does the task involve blind/dig penetration (i.e.: excavation, digging into soil or demolition drilling or cutting into any wall, floor, or ceiling? 
NO 	Will you be using or producing hazardous material , will it require disposal or transport? (Use of Department of Transportation Hazardous Material Class 1 Explosives require DOE approval.) 
NO 	Will you be using or building lasers ? 
NO 	Any other hazards we may have overlooked with this list? 
Safety Controls 

NO 	Does the task affect any of the credited controls listed in the Accelerator Safety Envelope? 
NO 	Does the task affect any of the Defense-in-Depth Controls listed in the Facility Safety Assessment Document? 
NO 	Does the task affect any of the internal circuits, systems, or components of equipment interfaced to the PSS? 
NO 	Does the task require bypassing PSS safety functions ( Link to PSS Jumper Request ) 
NO 	Will the task affect infrastructure and utilities used by the PSS? 
NO 	Will the task affect other safety system components not listed above? 
Radiological Hazards 

--- 	Are there any radiological hazards associated with this task? Description of Task 
Land wire on breaker for new circuit 

Affected equipment: 

Condensate Pump 
Receptacle Level 1 -S 
Condensate Pump 
Receptacle Level 2 -S 
Condensate Pump 
Receptacle Level 3 -S 
Lights Level 3 
Receptacle Equipment Rack L1-14 
Lights Level 2 
Lights Level 1 
Spare in J-Box 
Spare 
Ground Level 5 wire Receptacle 
Chiller (Tycol 5 wire recept) 
Gen Control Circuit 
Air Compressor Receptacle 
EBU 
Secondary Vacuum 
Pump Heater 
Solenoid Power Distribution 
S. Clamshell Receptacle 
SPARE IN BOX ABOVE 
SPARE IN BOX ABOVE 
SPARE IN BOX ABOVE 
S. Clamshell Lights 
S. Clamshell Con. Pump 
CCW Regulator 
30A 115V Receptacle level 1 
Receptacle Equipment Rack L1-14A 
Quad at Chiller 
GFCI at Ground Level 
Light Ground Level 




Status Application: 	HBList 
Task ID: 	1560 
Task Status: 	NEW 
Time Estimate: 	30 Minutes 
Required PSS: 	NA 
Priority: 	First Opportunity 
Scheduled: 	07/21/17 
Created: 	07/19/17 14:35 
Last Modified: 	07/19/17 14:35 
Created By: 	J_Caterbone (x.7570) 
Owned By: 	J_Caterbone (x.7570) 
Created For: 	
Responsible: 	Josh Caterbone 
Project: 	
Charge Code: 	
Risk Classification 
(pre-mitigation): 	1 
Risk Classification 
(post-mitigation): 	1 PPE Required 

    * Hard Hat 
    * Safety Glasses w/side shields 
    * Safety Shoes 
    * Proper Work Clothes 
Systems 

    * EH 
    * FACILITY 
Areas 

BUILDINGS:     * Hall B 
    * Trailer 94B 
Attachments 

Add an attachment...