[Halld-cal] FCAL LV Supply was Beam Test

[Matthew Shepherd]

Hi Fernando,

That is correct -- the are not tightly specified.  It seems like some minimal level of control and monitoring might be desirable.  That is why I was wondering if there was a preferred choice from the slow control standpoint:  Hovannes or Elliot, is there a preference?

If there is not one, then we can simply pick a suitable model.  The CAN <-> Ethernet boxes do provide some digital input and output pins that could be useful to interface simple monitoring or control for a supply.

-Matt

On Aug 15, 2011, at 2:04 PM, Fernando J. Barbosa wrote:

> Hi Matt,
> 
> GlueX-doc-1035 has an old default configuration using the Wiener MPOD system. However, that is just a placeholder for the FCAL - GlueX-doc-747 has no data for the FCAL supplies. The FCAL suplies (24V) do not have to have tight specs, I believe, on noise or regulation and they could be some off-the shelf units. I recall these were to be integrated into the FCAL distribution boxes.
> 
> Best regards,
> Fernando
> 
> 
> 
> 
> Matthew Shepherd wrote:
>> On Aug 15, 2011, at 1:45 PM, Fernando J. Barbosa wrote:
>> 
>>  
>>> Matt, Elton - Hovanes reminded me about the power supplies for the FCAL. The contract, I think, is for IU to supply a complete turn-key detector sub-system which includes the CW bases power supplies. Do you have an updated diagram showing the distribution chassis?
>>>    
>> 
>> Not at the present moment.  Is there a preferred low voltage power supply vendor that would improve integration into the overall control system?  
>> -Matt
>>  
> <barbosa.vcf>