[Halld-controls] [Dsg-halld_plc] PVs to be added to IOC for display in WEDM

[Hovanes Egiyan]

Awesome, thanks !


On 7/30/19 4:32 PM, Tyler Lemon wrote:
> Hello,
>
> I found in the EDM manual that you can do local PV types that are 
> simple calculation (similar to what Brian's mentioned).
>
> It looks like this type of local PV can be displayed in WEDM.
>
> I've added four sums to the voltage tap screens so nothing else is needed.
>
> Best regards,
> Tyler
> ------------------------------------------------------------------------
> *From:* Brian Eng <beng at jlab.org>
> *Sent:* Tuesday, July 30, 2019 4:19 PM
> *To:* Hovanes Egiyan <hovanes at jlab.org>
> *Cc:* Tyler Lemon <tlemon at jlab.org>; dsg-halld_plc at jlab.org 
> <dsg-halld_plc at jlab.org>; Hall D Controls <halld-controls at jlab.org>
> *Subject:* Re: [Halld-controls] [Dsg-halld_plc] PVs to be added to IOC 
> for display in WEDM
> Hovanes,
>
> I wasn't planning on it ...
>
> Shouldn't that just be a CALC type PV instead of a CSS rule?
>
> I pretty sure I can't make those on the NI EPICS IOC, which means that 
> should also be on the solenoid IOC.
>
> > On Jul 30, 2019, at 3:46 PM, Hovanes Egiyan <hovanes at jlab.org> wrote:
> >
> > Thanks Tyler.
> > Do you know if Brian is going to do the summed voltages for the 
> Voltage Taps screen for solenoid?
> > Hovanes.
>
> _______________________________________________
> Halld-controls mailing list
> Halld-controls at jlab.org
> https://mailman.jlab.org/mailman/listinfo/halld-controls
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/halld-controls/attachments/20190730/72eff730/attachment.html>