[Halld-level1] Bcal stand alone setups

[Alexander Somov]

Thanks Chris,


Please go ahead, we can switch to another SSP

Is the updated connection scheme on the M drive ?

Cheers,
       Alex


On Thu, 10 Apr 2014, Chris Cuevas wrote:

> Hi,
>
> That is good news Alex.
>
> I plan to re-connect the Global Crate SSP patch cables to match the
> latest port assignment map.
> They are presently organized from an older port map.
> Should not take long and will be completed by this afternoon.  If this
> conflicts with any CTP-->SSP testing please advise.
>
> -Chris
> ~~~~~~~~~~~~
> On 4/9/2014 8:18 PM, Alexander Somov wrote:
>> Hi,
>>
>> After fixing some issues with the coda component
>> priorities, the TI optical link 5 is working again.
>>
>> I've connected master TI links for both bcal N4 and S4
>> setups back to the port 5  (will reconnect fcal tomorrow).
>>
>> Bcal fadc board in slot 15 in the crate rocbcal1 has problems
>> with loading firmware; I took this board out. We'll
>> check it tomorrow. You can read out all fadc boards from all
>> N4 and B4 bcal crates now (no boards are missing).
>>
>> Cheers,
>>          Alex
>>
>>
>>
>>
>>
>> _______________________________________________
>> Halld-level1 mailing list
>> Halld-level1 at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/halld-level1
>
>
> _______________________________________________
> Halld-level1 mailing list
> Halld-level1 at jlab.org
> https://mailman.jlab.org/mailman/listinfo/halld-level1
>