[Halld-offline] reorganization of tracking and pid code

[Beni Zihlmann]

Hi All,
now I see the issue. it is mcsmear that does it.
if you use the original hdgeant.hddm to analyze without running through 
mcsmear
the problem is not there.

cheers,
Beni
> I was able to reproduce the error. See attached log file.
>
> On 01/15/2010 02:43 PM, Kornicer, Mihajlo wrote:
>>
>> generate 100 particle-gun photons, default kinematics
>>
>> hdgeant
>> mcsmear hdgeant.hddm
>>
>> Insert lines
>>
>> #include "PID/DPhoton.h"
>>
>> and
>>     vector<const DPhoton*> photons;
>>     eventLoop->Get(photons);
>> into
>> ../Analysis/hd_example/MyProcessor.cc
>> and run
>> hd_example hdgeant_nsmeared.hddm
>>
>> Quoting "Mark M. Ito" <marki at jlab.org>:
>>
>>> How are you smearing the monte carlo, if at all?
>>> What reconstruction binary are you using? With what arguments?
>>>
>>> On 01/15/2010 11:43 AM, Kornicer, Mihajlo wrote:
>>>>
>>>> Hi Mark,
>>>>
>>>> Claire volunteered to build the latest code and see if this is only
>>>> my environment problem or something else.
>>>>
>>>> In the mean time, it would be nice to explain what is missing in
>>>>
>>>> OSNAME=Linux
>>>> HALLD_HOME=/home/s4/kornicer/halld
>>>> HDDS_HOME=/home/s4/kornicer/halld/hdds
>>>> BMS_OSNAME=Linux
>>>> HALLD_LIB=/home/s4/kornicer/halld/lib/Linux
>>>> HALLD_BIN=/home/s4/kornicer/halld/bin/Linux
>>>> JANA_CALIB_URL=file:///home/s4/kornicer/halld/calib
>>>> JANA_PLUGIN_PATH=/home/s4/kornicer/halld/lib/Linux
>>>> JANA_GEOMETRY_URL=xmlfile:///home/s4/kornicer/halld/hdds/main_HDDS.xml
>>>>
>>>> When environment is as below
>>>>
>>>> BMS_OSNAME=Linux_CentOS4-athlon-gcc3.4.4
>>>> HALLD_HOME=/home/s4/kornicer/halld
>>>> HALLD_LIB=/home/s4/kornicer/halld/lib/Linux_CentOS4-athlon-gcc3.4.4
>>>> HALLD_BIN=/home/s4/kornicer/halld/bin/Linux_CentOS4-athlon-gcc3.4.4
>>>> JANA_CALIB_URL=file:///home/s4/kornicer/halld/calib
>>>> JANA_PLUGIN_PATH=/home/s4/kornicer/halld/lib/Linux_CentOS4-athlon-gcc3.4.4 
>>>>
>>>> JANA_GEOMETRY_URL=xmlfile:///home/s4/kornicer/halld/hdds/main_HDDS.xml
>>>>
>>>> same errors pop out. Installed Jana version is 0.5.2.
>>>> I am attaching the output from one of the hdds/make attempts and a
>>>> beginning of
>>>> output from src/make if this can help.
>>>>
>>>> Thanks,
>>>> Mihajlo
>>>>
>>>> Quoting "Mark M. Ito" <marki at jlab.org>:
>>>>
>>>>> Are you still having a problem with this? If so I will try to look
>>>>> into it further.
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>>