[Halld-offline] reorganization of tracking and pid code

[Kornicer, Mihajlo]

Hi Beni,

not sure that is the answer. There are no FCAL hits before mcsmear so 
nothing to do in FCAL factories, thou this might be different for BCAL.

The line in the run.log might point to the source of error

JCalibrationFile.cc:94 Unable to open 
"/group/halld/calib/PID/photon_track_matching"!

which I do not see in my output (due to different JANA?)

Great Mark!

Quoting Beni Zihlmann <zihlmann at jlab.org>:

> Hi All,
> now I see the issue. it is mcsmear that does it.
> if you use the original hdgeant.hddm to analyze without running
> through mcsmear
> the problem is not there.
>
> cheers,
> Beni
>> I was able to reproduce the error. See attached log file.
>>
>> On 01/15/2010 02:43 PM, Kornicer, Mihajlo wrote:
>>>
>>> generate 100 particle-gun photons, default kinematics
>>>
>>> hdgeant
>>> mcsmear hdgeant.hddm
>>>
>>> Insert lines
>>>
>>> #include "PID/DPhoton.h"
>>>
>>> and
>>>     vector<const DPhoton*> photons;
>>>     eventLoop->Get(photons);
>>> into
>>> ../Analysis/hd_example/MyProcessor.cc
>>> and run
>>> hd_example hdgeant_nsmeared.hddm
>>>
>>> Quoting "Mark M. Ito" <marki at jlab.org>:
>>>
>>>> How are you smearing the monte carlo, if at all?
>>>> What reconstruction binary are you using? With what arguments?
>>>>
>>>> On 01/15/2010 11:43 AM, Kornicer, Mihajlo wrote:
>>>>>
>>>>> Hi Mark,
>>>>>
>>>>> Claire volunteered to build the latest code and see if this is only
>>>>> my environment problem or something else.
>>>>>
>>>>> In the mean time, it would be nice to explain what is missing in
>>>>>
>>>>> OSNAME=Linux
>>>>> HALLD_HOME=/home/s4/kornicer/halld
>>>>> HDDS_HOME=/home/s4/kornicer/halld/hdds
>>>>> BMS_OSNAME=Linux
>>>>> HALLD_LIB=/home/s4/kornicer/halld/lib/Linux
>>>>> HALLD_BIN=/home/s4/kornicer/halld/bin/Linux
>>>>> JANA_CALIB_URL=file:///home/s4/kornicer/halld/calib
>>>>> JANA_PLUGIN_PATH=/home/s4/kornicer/halld/lib/Linux
>>>>> JANA_GEOMETRY_URL=xmlfile:///home/s4/kornicer/halld/hdds/main_HDDS.xml
>>>>>
>>>>> When environment is as below
>>>>>
>>>>> BMS_OSNAME=Linux_CentOS4-athlon-gcc3.4.4
>>>>> HALLD_HOME=/home/s4/kornicer/halld
>>>>> HALLD_LIB=/home/s4/kornicer/halld/lib/Linux_CentOS4-athlon-gcc3.4.4
>>>>> HALLD_BIN=/home/s4/kornicer/halld/bin/Linux_CentOS4-athlon-gcc3.4.4
>>>>> JANA_CALIB_URL=file:///home/s4/kornicer/halld/calib
>>>>> JANA_PLUGIN_PATH=/home/s4/kornicer/halld/lib/Linux_CentOS4-athlon-gcc3.4.4
>>>>> JANA_GEOMETRY_URL=xmlfile:///home/s4/kornicer/halld/hdds/main_HDDS.xml
>>>>>
>>>>> same errors pop out. Installed Jana version is 0.5.2.
>>>>> I am attaching the output from one of the hdds/make attempts and a
>>>>> beginning of
>>>>> output from src/make if this can help.
>>>>>
>>>>> Thanks,
>>>>> Mihajlo
>>>>>
>>>>> Quoting "Mark M. Ito" <marki at jlab.org>:
>>>>>
>>>>>> Are you still having a problem with this? If so I will try to look
>>>>>> into it further.
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>>
>
>
>