[Halld-physics] Monitoring Launch 2025-01 ver13

[zihlmann]

I guess it is the base time offsets:

[zihlmann at ifarm2401 JANA2]$ ccdb dump ECAL/base_time_offset:133110::2025-10
#Fixed calibrations due to bad alignment with RF
   -97.340
[zihlmann at ifarm2401 JANA2]$ ccdb dump ECAL/base_time_offset:133110::2025-11
#Fixed calibrations due to bad alignment with RF
   -104.041



On 11/26/25 10:12, zihlmann wrote:
> And the ECAL was all good in ver12!
>
> On 11/26/25 10:05, zihlmann wrote:
>> On more issue that Simon pointed out to me.
>> The ECAL timing is way off for all runs. It is around 6.6ns
>> this is so far off that it barely fits into the monitoring histogram.
>> I looked at two separate histograms and both yield the same result
>> of a big offset:
>> "HLDetectorTiming/Physics Triggers/TRACKING/ECAL - RF Time
>> and:
>> Independent/Hist_Neutrals/ECALNeutralShowerDeltaTVsE
>>
>> At this point I have no idea why the ECAL is so off.
>>
>> Beni
>>
>> On 11/26/25 08:37, zihlmann wrote:
>>> Hi All,
>>> there are two runs where something did not go as planed.
>>> 132705 and 133564, both these runs have hardly any statistics in the 
>>> root files (at least the histogram
>>> I was looking at). However, both these runs are are over 1h long and 
>>> have plenty of triggers.
>>>
>>> cheers,
>>> Beni
>>>
>>> On 11/8/25 13:13, Alexander Austregesilo via Halld-physics wrote:
>>>>
>>>> Dear Colleagues,
>>>>
>>>> We completed another full monitoring launch for the 2025-01 
>>>> GlueX-II data set. We successfully reconstructed 5 files for all 
>>>> 1197 runs with the RCDB query "@is_dirc_production and status!=0", 
>>>> for the first time with the correct material maps.
>>>>
>>>> The usual monitoring plots can be found on the new PlotBrowser page:
>>>>
>>>> https://halldweb.jlab.org/PlotGrader/browser_dev.html?minRunNum=131593&maxRunNum=133606&RunPeriod=RunPeriod-2025-01&Version=mon_ver13
>>>>
>>>> All merged histogram files can be found on the work disk at:
>>>> /work/halld/data_monitoring/RunPeriod-2025-01/mon_ver13/rootfiles/
>>>>
>>>> The REST files, trigger skims and several root trees, including 
>>>> PART trees for pi0, rho, omega and KLambda, are saved on cache:
>>>> /cache/halld/offline_monitoring/RunPeriod-2025-01/ver13/
>>>>
>>>> Best regards,
>>>>
>>>> Alex
>>>>
>>>>
>>>> -- 
>>>> Alexander Austregesilo
>>>>
>>>> Staff Scientist - Experimental Nuclear Physics
>>>> Thomas Jefferson National Accelerator Facility
>>>> Newport News, VA
>>>> aaustreg at jlab.org
>>>> (757) 269-6982
>>>>
>>>> _______________________________________________
>>>> Halld-physics mailing list
>>>> Halld-physics at jlab.org
>>>> https://mailman.jlab.org/mailman/listinfo/halld-physics
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/halld-physics/attachments/20251126/dc3fdf25/attachment.htm>