[Halld-pid-upgrade] Confirming the Horizontal Orientation

[John Hardin]

Ok, then I will tell them to go that way as well.  We'll have time to talk
about this next week too, I suppose.

John

On Wed, May 20, 2015 at 6:13 PM, Shepherd, Matthew <mashephe at indiana.edu>
wrote:

>
> I think the horizontal orientation is the way to go.
>
> John Frye is working on conceptual designs for that.
>
> Matt
>
> ---------------------------------------------------------------------
> Matthew Shepherd, Associate Professor
> Department of Physics, Indiana University, Swain West 265
> 727 East Third Street, Bloomington, IN 47405
>
> Office Phone:  +1 812 856 5808
>
> > On May 19, 2015, at 9:10 PM, Justin Stevens <jrsteven at jlab.org> wrote:
> >
> > Please see the message below from John asking for confirmation that
> we've decided to use the horizontal bar orientation for the prototype box
> design.  If someone sees a problem with this please send a note to the list.
> > -Justin
> >
> > PS. There may be an issue with the mailing list (John's post to the list
> failed earlier) so let me know if you see similar problems.
> >
> > ---------- Forwarded message ----------
> > From: John Hardin <jmhardin at mit.edu>
> > Date: Tue, May 19, 2015 at 5:57 PM
> > Subject: Confirming the Horizontal Orientation
> > To: Halld-pid-upgrade at jlab.org
> >
> >
> > Hello all,
> >     Bates is at a stage where they need to finalize whether we are using
> a horizontal or vertical orientation for the bars (the engineering of the
> seals is different enough that it shouldn't be done in parallel).  Mike and
> I are of the opinion that we should  finalize the prototype as being
> horizontal, is there any reason I should tell them otherwise?
> >
> > Thank you,
> > John
> > _______________________________________________
> > Halld-pid-upgrade mailing list
> > Halld-pid-upgrade at jlab.org
> > https://mailman.jlab.org/mailman/listinfo/halld-pid-upgrade
>
>
> _______________________________________________
> Halld-pid-upgrade mailing list
> Halld-pid-upgrade at jlab.org
> https://mailman.jlab.org/mailman/listinfo/halld-pid-upgrade
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/halld-pid-upgrade/attachments/20150521/a7e92ec4/attachment.html>