[Hbi-svt] SVT Electronics PCBs

[Marc McMullen]

Hi Michael,

I was wondering if you had time to send me the problems on the Hybrid 
Testboard you were having as well as any files if the board has been 
changed since I sent it to you. I could take a look at it and see if I 
can help out with that. In the interim we have had some discussion on 
your options if that pcb cannot be made on your end:

1. We have a quote for this design (Hybrid Testboard) from Dyconnex for 
around $12K. We could submit a requisition and after it gets signed 
manufacturing could take a 30 to 45 days.

2. We have a design out for manufacture currently which we are going to 
use to develop software, it has two FSSR2 chips and room for two 4 inch 
sensors. You could make some modifications to this pcb and add a third 
and fourth sensor. I am expecting these to be at Jlab in a couple of weeks.

3. The pcb Brian designed, which you have in hand, can be used much in 
the same manner as option #2.

4. I am expecting wrapping up the HFCB design in a few weeks, and 
sending it for manufacture, this also should be able to be used in the 
same manner as option #2.

Let me know how you would like to proceed. Again I have proceeded with 
the current HFCB design in an effort to complete the electronics end of 
the first article SVT module.


Thanks
Marc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mcmullen.vcf
Type: text/x-vcard
Size: 252 bytes
Desc: not available
Url : https://mailman.jlab.org/pipermail/hbi-svt/attachments/20100604/e5bdd715/attachment.vcf