[Hbi-svt] [Fwd: BST pdfs]

[Saptarshi Mandal]

Thanks for the layouts, Marc. The positions in Rev1 are of course very 
similar to the layout I had made by hand sketches. Rev 2, with its 
additional Silicon does extend significantly further upstream from Rev 
1. I'll look into the current JT files of the targets and try to 
determine if the cold plate will interfere with the parts of the target 
assembly. However, I'm not sure if the dimensions on the target assembly 
are very accurate.


Marc McMullen wrote:
> Hi Saptarshi,
>
> Here are the two layouts I wrote to you about earlier. Rev1 has is the 
> same 10-14-18 I sent before but it has been adjusted to the 
> repositioned 35 degree line which you spoke of. Rev2 has an additional 
> set of silicon on region 1 as well as the adjustments made in rev1. 
> Have a look and see how this works and what adjustments would need to 
> be made to the cooling plate position and support tube, maybe we can 
> get together tomorrow and discuss it if you have time.
>
> Marc
>
> -------- Original Message --------
> Subject:     BST pdfs
> Date:     Wed, 02 Jun 2010 14:54:51 -0400
> From:     Mary Ann Antonioli <antoniol at jlab.org>
> To:     mcmullen at jlab.org
>
>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: mandal.vcf
Type: text/x-vcard
Size: 239 bytes
Desc: not available
Url : https://mailman.jlab.org/pipermail/hbi-svt/attachments/20100602/7f5e8f3f/attachment.vcf