[Hbi-svt] Meeting on 6/22

[Marc McMullen]

Hi Michael,

This is just a reminder about the meeting we scheduled for Tuesday Jun 
22 at 8:30 our time. We should discuss the progress of your evaluation 
of the possibility to adjust the module assembly process as well as my 
progress on the HFCB and any progress Saptarshi has on the mechanical 
design.

One of the issues Saptarshi and I have addressed is the cooling tab 
which will be built into the module. We have research suitable screws or 
bolts needed to fasten the HFCB to the cooling tab. Using standard 
length screws we have found that length will be an issue  if the tab is 
split into two parts as shown in the drawing I sent you on 5/26. We do 
not wish to use nuts and bolts, we would prefer to tap the metal cooling 
tab and insert bolts into it. I have provided 3 bolt holes in the HFCB 
design on each side (which are offset) and soon I will give the pattern 
to Saptarshi to include in the tab design. Saptarshi also mentions 
splitting the tab may present alignment issues because the tab is the 
upstream mount for the module. We do realize this is all subject to the 
possibility of you being able to adjust your module assembly plan, if 
you have any suggestions let us know in the meeting and we can make 
adaptations to the design.

Thanks
Marc


-------------- next part --------------
A non-text attachment was scrubbed...
Name: mcmullen.vcf
Type: text/x-vcard
Size: 252 bytes
Desc: not available
Url : https://mailman.jlab.org/pipermail/hbi-svt/attachments/20100618/0d72eeb2/attachment.vcf