[Moller_intdet] [EXTERNAL] Ring 5 prototype

[Michael Gericke]

Hello,

Nafis and I put together the first full scale Ring 5 prototype this 
afternoon (see attached figures). The entire mounting structure is 3D 
printed and the quartz and light guide are installed, and we test fitted 
the PMT.
The structural integrity is very good, even though we did not use a 
particularly special (say carbon fiber infused) material.  We will be 
improving several things we noticed, which made the assembly cumbersome
and which would eventually improve the light tightening.

Regards,

Michael


-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210430_162218.jpg
Type: image/jpeg
Size: 3268796 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/moller_intdet/attachments/20210430/4e5a6cab/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210430_162840.jpg
Type: image/jpeg
Size: 3679049 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/moller_intdet/attachments/20210430/4e5a6cab/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210430_163238.jpg
Type: image/jpeg
Size: 3333732 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/moller_intdet/attachments/20210430/4e5a6cab/attachment-0005.jpg>